Frequency / Type of X-Over (LF to MF): 350Hz, 24dB/oct Linkwitz-Riley
Frequency / Type of X-Over (MF to HF): 1050Hz, 48dB/oct Linkwitz-Riley
Low Frequency Driver Power: Program: 1600W / Peak: 3200W (10ms)
Medium Frequency Driver Power: Program: 500W / Peak: 1000W (10ms)
High Frequency Driver Power: Program: 440W / Peak: 880W (10ms)
Dimensions (WxHxD): 1020 x 380 x 501 mm
Net Weight: 66kg
Shipping Weight: 69.1kg

Frequency Response (-6dB): 58Hz - 19.000Hz
Low Frequency Extension (-10dB): 48HZ
Low Frequency Driver: 1 x 12" (300mm)/3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver : 2 x 1.4" (36mm) exit/2.5" (65mm) VC, B&C custom compression driver
Dimensions (WxHxD): 602 x 350 x 465 mm
Net Weight: 34.5kg
Shipping Weight: 35.8kg

TECHNICAL SPECIFICATIONS
Product Type: Passive 2-Way Line Array Element
Frequency Response (-6dB): 58Hz - 19.000Hz
Low Frequency Extension (-10dB): 48Hz
Nominal Coverage (-6dB): 90º x 8º
LF Nominal Impedance: 8Ω
HF Nominal Impedance: 16Ω
Frequency / Type of X-Over: 1150Hz Linkwitz-Riley 48dB/oct
Recommended High-Pass Filter: 45Hz, 18dB/oct Butterworth
LF Sensitivity (1W, 1m): 100dB (Full-Space)
HF Sensitivity (1W, 1m): 108dB (Full-Space)
Maximum SPL (calculated): 129dB / 135dB (Full-Space)
LF Maximum SPL (calculated): 129dB / 135dB (Full-Space)
HF Maximum SPL (calculated): 133dB / 139dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm)/3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 2 x 1.4" (36mm) exit/2.5" (65mm) VC, B&C custom compression driver
Low Frequency Driver Power: Program: 800W / Peak: 1600W (10ms)
High Frequency Driver Power: Program: 320W / Peak: 640W (10ms)
Input Connectors: 2 x Neutrik NL4
Recommended Amplifier: N-RAK
Fittings: Adjustable (0º to 8º) rigging system
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: 15mm Multi-Laminate Birch Plywood
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 602 x 350 x 465mm
Net Weight: 33kg
Shipping Weight: 35.3kg

TECHNICAL SPECIFICATIONS
Product Type: 2-way passive line array element
Frequency Response (-6dB): 75Hz - 19.000Hz
Nominal Coverage (-6dB): 105º x 12º
Program Power: 600W
Peak Power: 1200W
Nominal Impedance: 16Ω
Frequency / Type of X-Over: 1200Hz passive (internal)
Recommended High-Pass Filter: 65Hz, 18dB/oct Butterworth (Full-Range Operation)
Recommended High-Pass Filter (w/ Subwoofer): 140Hz, 24dB/oct Linkwitz-Riley
Sensitivity (1W, 1m): 100dB (Full-Space)
Maximum SPL (calculated): 127.6dB/130.6dB (Full-Space)
Low Frequency Driver: 2 x 6.5" Planar Diaphragm, Neodymium Custom Speaker
High Frequency Driver: 1 x 1" (25mm) exit/ 2" (51mm) VC HT Polymer Diaphragm, B&C custom Neodymium Compression Driver
Input Connectors: 2 x SpeakON NL4 parallel wired
Recommended Amplifier: LAs15A / N-RAK
Fittings: 3-point adjustable rigging system (0º to 12º with 1º Step)
Handles: 2 x side handles
Grille: Black Perforated Steel
Construction: 15mm Multi-Laminate Birch Plywood
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 499mm x 195mm x 430mm
Net Weight: 15kg

Product Type: Passive Two-way Vertical Array
Frequency Response (-6dB): 80Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 40º user rotatable
Program Power: 500W
Nominal Impedance: 4Ω
Sensitivity (1W, 1m): 95dB (Full-Space)
Maximum SPL (calculated): 121dB / 127dB (Full-Space)
Low Frequency Driver: 2 x 6.5" (170mm) / 1.5" (38mm) voice coil, custom speakers
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x Neutrik NL4

TECHNICAL SPECIFICATIONS
Product Type: Passive Two-way Speaker
Frequency Response (-6dB): 60Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Program Power: 300W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 93.5dB (Full-Space)
Maximum SPL (calculated): 118dB/124dB (Full-Space)
Low Frequency Driver: 1 x 8" (210mm) / 2" (50.5mm) VC, custom speakers
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x Neutrik NL4
Recommended Amplifier: MA1700 / MA900
Dimensions (WxHxD): 254 x 415 x 301 mm
Net Weight: 10.2kg

TECHNICAL SPECIFICATIONS
Product Type: Passive Two-Way Speaker/Monitor
Frequency Response (-6dB): 54Hz - 18.000Hz
Nominal Coverage (-6dB): 90º x 60º user rotatable
Program Power: 600W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 99dB (Full-Space)
Maximum SPL (calculated): 126dB / 132dB (Full-Space)
Low Frequency Driver: 1 x 15" (380mm) / 3" (76mm) voice coil, custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.75" (44mm) voice coil, custom compression driver
Input Connectors: 2 x Neutrik NL4
Recommended Amplifier: MA2300 / MA1700
Dimensions (WxHxD): 431 x 654 x 440 mm
Net Weight: 24.5kg
Shipping Weight: 27.1kg

Product Type: Passive High Performance Full-Range Speaker/Monitor
Frequency Response (-6dB): 72Hz - 20.000Hz
Low Frequency Extension (-10dB): 64Hz
Nominal Coverage (-6dB): 90º x 60º rotatable, constant directivity
Program Power: 400W Peak Power 800W
Nominal Impedance 8Ω
Frequency / Type of X-Over: 2500Hz / asymetrical (internal)
Recommended High-Pass Filter: 55Hz, 18dB/oct Butterworth
Sensitivity (1W, 1m): 94dB (Full-Space)
Maximum SPL (calculated): 120dB / 126dB (Full-Space)
Low Frequency Driver: 1 x 8" (200mm) / 2" (50mm) VC, B&C custom speaker
High Frequency Driver
1 x 1" (25mm) exit / 1.4" (36mm) VC, B&C custom compression driver
Input Connectors: 2 x Neutrik NL4 parallel wired
Recommended Amplifier: MA1700 / MA900
Fittings: 16 x M6 threaded inserts, 1 x 35mm pole mount socket
Grille: Black Perforated Steel
Construction: 12mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 254 x 451 x 238 mm
Net Weight: 8.9kg

TECHNICAL SPECIFICATIONS
Product Type: Passive High Performance Full-Range Speaker/Monitor: Frequency Response (-6dB)
57Hz - 20.000Hz
Low Frequency Extension (-10dB): 50Hz
Nominal Coverage (-6dB): 50-100º x 50º rotatable, tailored dispersion technology
Program Power: 700W
Peak Power: 1400W
Nominal Impedance: 8Ω
Frequency / Type of X-Over: 1650Hz / asymetrical (internal)
Recommended High-Pass Filter: 46Hz, 18dB/oct Butterworth: Sensitivity (1W, 1m)
99dB (Full-Space)
Maximum SPL (calculated): 127.5dB / 133.5dB (Full-Space)
Low Frequency Driver: 1 x 12" (300mm) / 3" (76mm) VC, B&C custom speaker
High Frequency Driver: 1 x 1" (25mm) exit / 1.7" (44mm) VC, B&C custom compression driver
Input Connectors: 2 x Neutrik NL4 parallel wired
Recommended Amplifier :MA3200 / MA2300
Fittings: 16 x M8 threaded inserts, 1 x 35mm pole mount Handles: 1 on each side
Grille: Black Perforated Steel
Construction: 15mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 422 x 657 x 361 mm
Net Weight: 23.6kg
Shipping Weight: 25.8kg

TECHNICAL SPECIFICATIONS
Product Type: Passive High Performance Full-Range Speaker/Monitor: Frequency Response (-6dB)
53Hz - 18.000Hz: Low Frequency Extension (-10dB)
48Hz
Nominal Coverage (-6dB): 50-100º x 50º Rotatable, Tailored Dispersion Technology
Program Power: 800W
Peak Power: 1600W
Nominal Impedance: 8Ω
Frequency / Type of X-Over: 1300Hz / asymetrical (internal)
Recommended High-Pass Filter: 42Hz, 18dB/oct Butterworth
Sensitivity (1W, 1m): 100dB (Full-Space)
Maximum SPL (calculated): 129dB / 135dB (Full-Space)
Low Frequency Driver: 1 x 15" (380mm) / 3" (76mm) VC, B&C custom speaker
High Frequency Driver: 1 x 1.4" (36mm) exit / 3" (75mm) VC, B&C custom compression driver
Input Connectors: 2 x Neutrik NL4 parallel wired
Recommended Amplifier: MA3200 / MA2300
Fittings: 16 x M8 threaded inserts, 1 x 35mm pole mount socket
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: 15mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 460 x 732 x 404 mm
Net Weight: 31.4kg
Shipping Weight: 33.6kg

Maximum SPL (calculated)
1TECHNICAL SPECIFICATIONS
Product Type: Tuned Dipolar, Variable Beam Straight Line Array
Frequency Response (-10dB): 135Hz - 20kHz
Nominal Coverage (-6dB): 90º (+/-20º 1.5-5kHz) H x 25º(+/-10º 1.2-16kHz) / (+10º/-5º 1.5-16kHz) V
Program Power: 480W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 97dB (Music) / 100dB (Vocal)
Maximum SPL (calculated): 123.1dB (Music) / 126.1dB (Vocal)
Full-Range Driver: 8 x 3" (70mm)/0.75" (20mm) VC, custom neodymium speaker
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Subwoofer: HFA115s, HFA115sHP, HFA118sHP
Recommended Amplifier: MA1700
Special Features: Vocal or Music / Narrow or Wide (User Selectable)
Construction: Aluminum / Wood / Steel / 3D Fabric
Dimensions (WxHxD): 108 x 685 x 153mm
Net Weight: 6.2kg

Product Type: Passive Coaxial Reflex Speaker
Frequency Response (-6dB): 112Hz - 18.000Hz
Low Frequency Extension (-10dB): 70Hz
Nominal Coverage (-6dB): 80º Conical
Program Power: 200W
Nominal Impedance: 8Ω
Recommended High-Pass Filter: 65Hz
Sensitivity (1W, 1m): 91dB (Full-Space)
Maximum SPL (calculated): 114dB / 117dB (Full-Space)
Low Frequency Driver: 1 x 5" (127mm) / 1.7" (44mm) VC, B&C Custom Speaker
High Frequency Driver: 1 x 1" (25mm) / 1" (25mm) VC, B&C Compression Driver
Input Connectors: 2 x Neutrik NL4; 2x Screw Terminal
Recommended Amplifier: MA900
Dimensions (WxHxD): 170 x 170 x 187 mm
Net Weight: 3.3kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 110º x 90º
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB / 107dB (Full-Space)
Low Frequency Driver: 1 x 4" Speaker
High Frequency Driver: 1 x 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier
Please consult your NEXT-proaudio Dealer: Grille
Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 140 x 230 x 172 mm
Net Weight: 2.8kg
Shipping Weight: 7kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 110º x 90º
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB / 107dB (Full-Space)
Low Frequency Driver: 1 x 4" Speaker
High Frequency Driver: 1 x 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: Please consult your NEXT-proaudio Dealer: Grille
Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 140 x 230 x 172 mm
Net Weight: 2.8kg
Shipping Weight: 7kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100º x 75º
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 108dB / 111dB (Full-Space)
Low Frequency Driver: 1 x 6.5" Speaker
High Frequency Driver: 1 x 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier
Please consult your NEXT-proaudio Dealer
Grille: Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 182 x 362 x 226 mm
Net Weight: 6.5kg
Shipping Weight: 15.6kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100º x 75º
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 108dB / 111dB (Full-Space)
Low Frequency Driver: 1 x 6.5" Speaker
High Frequency Driver: 1 x 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: Please consult your NEXT-proaudio Dealer
Grille: Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 182 x 362 x 226 mm
Net Weight: 6.5kg
Shipping Weight: 15.6kg

TECHNICAL SPECIFICATIONS
Product Type: 2-Way Passive Speaker (100V)
Frequency Response (-6dB): 55Hz - 18kHz
Nominal Coverage (-6dB): 100º x 70º
RMS Power: 150W
Program Power: 300W
Nominal Impedance: 16Ω
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 116dB / 119dB (Full-Space)
Low Frequency Driver: 1 x 8" Speaker
High Frequency Driver: 1 x 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier
Please consult your NEXT-proaudio Dealer
Grille: Acoustic Transparent Aluminum Grille
Construction: Weatherproof Plastic Cabinet (IP65)
Dimensions (WxHxD): 240 x 450 x 287 mm
Net Weight: 10.7kg
Shipping Weight: 12.2kg

K10s Passive Front-Loaded Subwoofer
Custom 1x10"
500W, 8Ω, 129dB Peak

Passive Front-Loaded Subwoofer
B&C Custom 1x12"
1400W, 8Ω, 125.5dB Peak

TECHNICAL SPECIFICATIONS
Product Type: Ultra-Compact Reflex Subwoofer
Frequency Response (-6dB): 44Hz - X-over
Nominal Impedance: 4Ω
Sensitivity (1W, 1m): 102dB (Half-Space)
Maximum SPL (calculated): 135dB/138dB (Half-Space)
Low Frequency Driver: 1 x 15" (380mm)/4" (100mm) VC, long excursion, B&C custom speaker
Low Frequency Driver Power: 2000W/4000W (10ms)
Input Connectors: 1 x Neutrik NL4
Dimensions (WxHxD): 499 x 475 x 580mm
Net Weight: 40kg

TECHNICAL SPECIFICATIONS
Product Type: Active Reflex Subwoofer
Frequency Response (-6dB): 36Hz - X-over
Amplifier Technology: 2 channel switched mode class D with DSP
Amplifier Power: RMS: 2200W / Program: 2960W / Peak: 5920W
DSP Technology: Controlled Networkable DSP 24bit/48kHz
DSP Adjustable Parameters: 6 PEQ, delay, HPF, LPF, Bass Enhancer, Level, Polarity, Mute
DSP Presets: 6 Factory and 2 User, selectable via software or rear panel switch
Control Type: Via RS485 and suplied software "SOUNDWARE"
Maximum SPL (calculated): 136dB / 142dB (Half-Space)
Subwoofer Driver: 1 x 18" (450mm) / 4" (100mm) voice coil, long excursion, B&C custom speaker
Power Input: 180V - 245V
Mains Connector: Signal: 2 x XLR ; Power: 2 x powerCON;
Power Consumption: 770W
Fittings: 1 x 35mm Pole Mount Socket
Dimensions (WxHxD): 525 x 703 x 735 mm
Net Weight: 47.9kg

TECHNICAL SPECIFICATIONS
Product Type: Passive Reflex Subwoofer
Frequency Response (-6dB): 36Hz - X-over
Low Frequency Extension (-10dB): 103dB (Half-Space)
Program Power: 2400W
Peak Power: 4800W
Nominal Impedance: 8Ω
Maximum SPL (calculated): 136.8dB / 142.8dB (Half-Space)
Subwoofer Driver: 1 x 18" (450mm) / 4" (100mm) voice coil, long excursion, B&C custom speaker
Mains Connector: Signal: 2 x Neutrik NL4
Recommended Amplifier: MA6000 / MA3200 (Bridge)
Fittings: 1 x 35mm Pole Mount Socket
Dimensions (WxHxD): 525 x 703 x 735 mm
Net Weight: 44.8kg

Program Power: 6000W
Peak Power: 12000W (10ms)
Recommended High-Pass Filter: 28Hz, 18dB/oct Butterworth
Sensitivity (1W, 1m): 109dB (Half-Space)
Dimensions (WxHxD): 1030 x 516 x 920 mm
Net Weight: 90kg
Shipping Weight: 96.8kg

18" Passive Subwoofer

18" Passive Subwoofer
Product Type: Passive Reflex Subwoofer
Frequency Response (-6dB): 36Hz - 160Hz
Program Power: 1000W
Peak Power: 2000W
Nominal Impedance: 8Ω
Maximum SPL Pgm/Peak (calculated): 132dB/135dB (Half-Space)
Subwoofer Driver: 1 x 18" (460mm), 4" (100mm) VC
Frequency / Type of X-Over: 80Hz to 120Hz - 24dB/oct LR (recommended)
Recommended High-Pass Filter: 34Hz, 18dB/oct Butterworth
Input Connectors: 2 x NL4
Recommended Amplifier: A504 DSP | A3800
Fittings: 1 x M20 and/or 35mm pole mount socket
Handles: 2 on each Side
Grille: Black Perforated Steel
Construction: Heavily Braced Multi-laminate Birch Plywood
Finish: Polyurea Coating
Dimensions (WxHxD): 560 x 545 x 780mm (22 x 21.5 x 30.7 in)
Net Weight: 46kg
Shipping Weight: 53kg
Accessories: Transportation Dolly | Individual Protective Cover

TECHNICAL SPECIFICATIONS
Product Type: 16-Channel Multi-Purpose Power Rack
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 16
Amplifier Power - Stereo 8Ω: 16 x 1600W
Amplifier Power - Stereo 4Ω: 16 x 3000W
Amplifier Power - Stereo 2Ω: 16 x 5200W
Amplifier Power - Bridge 8Ω: 8 x 6000W
Amplifier Power - Bridge 4Ω: 8 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Crosstalk: -70dB @ 1kHz
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment: up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply: Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Mains Connector: 3P+N+PE 32A CEE Male Plug
Power Consumption: 12A rms per Phase @ 416Y | 24A rms per Phase @ 173Y (1/8 of Maximum Power)
Special Features
Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 600mm x 624mm x 800mm
Net Weight: 91kg

TECHNICAL SPECIFICATIONS
Product Type: 8-Channel Multi-Purpose Power Rack
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 8
Amplifier Power - Stereo 8Ω: 8 x 1600W
Amplifier Power - Stereo 4Ω: 8 x 3000W
Amplifier Power - Stereo 2Ω: 8 x 5200W
Amplifier Power - Bridge 8Ω: 4 x 6000W
Amplifier Power - Bridge 4Ω: 4 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Crosstalk: -70dB @ 1kHz
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range
0º-45ºC - 32º-113ºF
Power Supply
Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Mains Connector: 3P+N+PE 32A CEE Male Plug
Power Consumption: 6A rms per Phase @ 416Y | 12A rms per Phase @ 173Y (1/8 of Maximum Power)
Special Features
Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 600mm x 624mm x 800mm
Net Weight: 66kg

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel Multi-Purpose Power Rack
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 4 x 1600w
Amplifier Power - Stereo 8Ω: 4 x 1600W
Amplifier Power - Stereo 4Ω: 4 x 3000W
Amplifier Power - Stereo 2Ω: 4 x 5200W
Amplifier Power - Bridge 8Ω: 2 x 6000W
Amplifier Power - Bridge 4Ω: 2 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply: Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Mains Connector: 3P+N+PE 32A CEE Male Plug
Power Consumption: 3A rms per Phase @ 416Y | 6A rms per Phase @ 173Y (1/8 of Maximum Power)
Special Features
Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 600mm x 624mm x 800mm
Net Weight: 57kg

TECHNICAL SPECIFICATIONS
Product Type: 8-Channel Multi-Purpose Power Rack
Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Number of Amplifier Channels: 8
Amplifier Power - Stereo 8Ω: 8 x 1500W
Amplifier Power - Stereo 4Ω: 8 x 1500W
Amplifier Power - Stereo 2Ω: 8 x 1250W
Amplifier Power - Bridge 8Ω: 4 x 3000W
Amplifier Power - Bridge 4Ω: 4 x 3000W
Damping Factor: >5000 @ 8Ω, 20Hz - 500Hz
THD+N: <0.1% (typical < 0.5%)
IMD: <0.1% (typical < 0.5%)
SNR (Signal to Noise Ratio): >110dB (20Hz - 20kHz, A weighted)
Crosstalk: -70dB @ 1kHz
Input Impedance: 20kΩ balanced
Delay Adjustment
up to 2s on input section; up to 100ms per output for time alignment
Power Supply: Universal, regulated switch mode
Power Input: 90V - 264V
Mains Connector
Neutrik Powercon 32A (Female Panel Socket)
Power Consumption: 10.4A rms @ 230V | 19A rms @ 120V (1/8 of Maximum Power)
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Limiters: TruePower, RMS voltage, RMS current, Peak
Dimensions (WxHxD): 600mm x 530mm x 800mm
Net Weight: 58kg

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel Multi-Purpose Power Rack
Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 1500W
Amplifier Power - Stereo 4Ω: 4 x 1500W
Amplifier Power - Stereo 2Ω: 4 x 1250W
Amplifier Power - Bridge 8Ω: 2 x 3000W
Amplifier Power - Bridge 4Ω: 2 x 3000W
Damping Factor: >5000 @ 8Ω, 20Hz - 500Hz
THD+N: <0.1% (typical < 0.5%)
IMD: <0.1% (typical < 0.5%)
SNR (Signal to Noise Ratio): >110dB (20Hz - 20kHz, A weighted)
Crosstalk: -70dB @ 1kHz
Input Impedance: 20kΩ balanced
Delay Adjustment: up to 2s on input section; up to 100ms per output for time alignment
Power Supply: Universal, regulated switch mode
Power Input: 90V - 264V
Mains Connector
Neutrik Powercon 32A (Female Panel Socket)
Power Consumption: 5.2A rms @ 230V | 9.5A rms @ 120V (1/8 of Maximum Power)
Special Features
Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass
Limiters: TruePower, RMS voltage, RMS current, Peak
Dimensions (WxHxD): 600mm x 530mm x 800mm
Net Weight: 49kg

TTECHNICAL SPECIFICATIONS
Product Type: 8-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 8
Amplifier Power - Stereo 8Ω: 8 x 1600W
Amplifier Power - Stereo 4Ω: 8 x 3000W
Amplifier Power - Stereo 2Ω: 8 x 5200W
Amplifier Power - Bridge 8Ω: 4 x 6000W
Amplifier Power - Bridge 4Ω: 4 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply
Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 88mm x 495mm

TECHNICAL SPECIFICATIONS
Product Type: 8-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 8
Amplifier Power - Stereo 8Ω: 8 x 1600W
Amplifier Power - Stereo 4Ω: 8 x 3000W
Amplifier Power - Stereo 2Ω: 8 x 5200W
Amplifier Power - Bridge 8Ω: 4 x 6000W
Amplifier Power - Bridge 4Ω: 4 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20Hz - 20kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform: Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply: Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 88mm x 495mm

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 1600W
Amplifier Power - Stereo 4Ω: 4 x 3000W
Amplifier Power - Stereo 2Ω: 4 x 5200W
Amplifier Power - Bridge 8Ω: 2 x 6000W
Amplifier Power - Bridge 4Ω: 2 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20 Hz - 20 kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology
ARM Cortex A-8 processor and TI C6000 DSP platform
Delay Adjustment: up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply
Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 44mm x 495mm

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel High-Performance Amplifier
Frequency Response (-6dB): 5Hz - 30kHz (-3dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 1600W
Amplifier Power - Stereo 4Ω: 4 x 3000W
Amplifier Power - Stereo 2Ω: 4 x 5200W
Amplifier Power - Bridge 8Ω: 2 x 6000W
Amplifier Power - Bridge 4Ω: 2 x 10400W
Damping Factor: > 5000 @ 8Ω, 20Hz - 500Hz
THD+N: < 0.5% (typically < 0.01%)
IMD: < 0.5% (typically < 0.01%)
Slew Rate: > 50V/µs
Noise Floor: -70dBV (20 Hz - 20 kHz, A weighted)
Input Impedance: 20kΩ balanced
DSP Technology: ARM Cortex A-8 processor and TI C6000 DSP platform: Delay Adjustment
up to 4s on input section; up to 200ms per output for time alignment
Operating Temperature Range: 0º-45ºC - 32º-113ºF
Power Supply
Universal, Single Phase, Bi-Phase or Three Phase acceptance, switching mode with PFC
Power Input: 85V - 440V
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 483mm x 44mm x 495mm

TECHNICAL SPECIFICATIONS
Product Type: 4-Channel High-Performance Amplifier
Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 1250W
Amplifier Power - Stereo 4Ω: 4 x 1500W
Amplifier Power - Stereo 2Ω: 4 x 1500W
Amplifier Power - Bridge 8Ω: 2 x 3000W
Amplifier Power - Bridge 4Ω: 2 x 3000W
THD+N: < 0.1% (typically < 0.05%)
IMD: < 0.1% (typically < 0.05%)
Input Impedance: 20kΩ balanced
Delay Adjustment: up to 2s on input section; up to 100ms per output for time alignment
Power Supply: Universal regulated switch mode with PFC, SRM
Power Input: 90-264 VAC @ 50/60 Hz
Special Features: Filters: Raised-cosine, custom FIR, parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop, hi/lo-pass | Limiters: TruePower, RMS voltage, RMS current, Peak | Active Damping Control
Dimensions (WxHxD): 484mm x 44.5mm x 405mm

Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Latency: 2.5ms
Power Supply: Universal, regulated switch mode with PFC
Power Input: 90V - 264V
Mains Connector: IEC 10A
Dimensions (WxHxD): 210mm x 40mm x 275mm
Net Weight: 2.6kg

TECHNICAL SPECIFICATIONS
Frequency Response (-6dB): 20Hz - 20kHz (±0.5dB) @ 1W, 8Ω
Number of Amplifier Channels: 4
Amplifier Power - Stereo 8Ω: 4 x 150W
Amplifier Power - Stereo 4Ω: 4 x 150W
Amplifier Power - Stereo 2Ω: 4 x 150W
Amplifier Power - 100V: 4 x 125W
Amplifier Power - 70V: 4 x 125W
SNR (Signal to Noise Ratio): >102dB (20Hz - 20kHz, A weighted)
Crosstalk: -60dB @ 1kHz
Input Impedance: 10kΩ to ground / 20kΩ balanced
Latency: 2.5ms
Audio Signal Inputs: Analog, GPIO
Input Connectors: 4 x Analog Sig.
Audio Signal Outputs: None
Speakers Output Connectors: 4 (Euro 5mm)
Power Supply: Universal, regulated switch mode with PFC
Power Input: 90V - 264V
Mains Connector
IEC 10A
Special Features
Filters: Parametric IIR: peaking, hi/lo-shelving, all-pass, band-pass, band-stop | Limiters: RMS voltage, Peak
Dimensions (WxHxD): 210mm x 40mm x 275mm
Net Weight: 2.6kg

Product Type: 2U Professional Amplifier
Frequency Response (-6dB): 15Hz - 25.000Hz (+0 / -1dB)
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Cooling Type: Front to back via 2 variable speed fans
Power Input: 230VAC, 50Hz-60Hz (others by request)

Product Type: 3U Professional Amplifier
Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Amplifier Technology: Class H
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Impedance: 10kΩ balanced to ground
Input Connectors: Female & Male XLR-3
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Power Input: 230VAC, 50Hz-60Hz (others by request)

Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF

Power Input: 230VAC, 50Hz-60Hz (others by request)
Dimensions (WxHxD): 483mm x 465mm x 88,8mm
Net Weight: 23.2kg
Shipping Weight: 24.8kg

Product Type: 2U Professional Amplifier
Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Impedance: 10kΩ balanced to ground
Input Connectors: Female XLR-3 and 6,35 TRS jack
Output Connectors: 4 pole Speakon and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Power Input: 230VAC, 50Hz-60Hz (others by request)

Product Type: Class D Amplifier with DSP, 4*750w (4ohm) or 2*1500w (100v)
Frequency Response: 20Hz - 20kHz (+0 / -0.5dB)
Audio Signal Inputs: 4 x Analog Unbalanced Inputs | 4 x Analog Balanced Inputs | Stereo S/PDIF
Input Connectors: 4 x RCA | 2 x 6-Pole 3.5mm Phoenix Type | 1 x RCA | 8 x GPIO
Audio Signal Outputs: Stereo S/PDIF
Output Connectors: 1 x RCA | 8 x GPIO
Speakers Output Connectors: 2 x 4-Pole 5mm Phoenix Type
Protections: Short Circuit, DC, Undervoltage, Temperature and Overload Protection
Power Input: AC 100V - 240V 50Hz/60Hz
Update to Firmware 1.4.2 necessary

TECHNICAL SPECIFICATIONS
Product Type: Coaxial Horn-Loaded Mid/High Speaker
Frequency Response (-6dB): 136Hz - 18.000Hz
Low Frequency Extension (-10dB): 130Hz
Nominal Coverage (-6dB): 90º x 50º Rotatable
MF Nominal Impedance: 8Ω
HF Nominal Impedance: 16Ω
MF Sensitivity (1W, 1m): 103dB (Full-Space)
HF Sensitivity (1W, 1m): 110dB (Full-Space)
Maximum SPL (calculated): 132dB / 138dB (Full-Space)
MF Maximum SPL (calculated): 132dB / 138dB (Full-Space)
HF Maximum SPL (calculated): 132dB / 138dB (Full-Space)
Medium Frequency Driver: 1 x 12" (300mm) / 3" (76mm) VC, Neodymium, B&C custom speaker
High Frequency Driver: 1 x 1.4" (36mm) exit / 2.5" (65mm) VC, B&C custom compression driver
Medium Frequency Driver Power
Program: 800W / Peak: 1600W
High Frequency Driver Power: Program: 160W / Peak: 320W
Input Connectors: 2 x Neutrik NL8 parallel wired
Recommended Amplifier: PXA8001 (Dedicated power rack)
Fittings: 16 x M8 threaded inserts for optional wheel kit, 48 x M8 threaded inserts for optional rigging/tilting systems
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: 15mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 616 x 612 x 641mm
Net Weight: 43.3kg

TECHNICAL SPECIFICATIONS
Product Type: Hybrid Horn-Loaded Bass Speaker
Frequency Response (-6dB): 42Hz - 180Hz
Low Frequency Extension (-10dB): 34Hz
Program Power: 2400W
Peak Power: 4800W (10ms)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 104dB (Half-Space)
Maximum SPL (calculated): 137.8dB / 143.8dB (Half-Space)
Subwoofer Driver: 1 x 18" (460mm) / 4" (100mm) VC, high excursion, B&C custom speaker
Input Connectors: 2 x Neutrik NL8 parallel wired
Recommended Amplifier: PXA8001 (Dedicated power rack)
Fittings: 16 x M8 threaded inserts for optional wheel kit, 12 x M8 threaded inserts for optional rigging system
Handles: 1 on each side
Grille: Black Perforated Steel
Construction: Braced 15mm multi-laminate birch ply
Finish: Semi-Matte Black Textured Coating
Dimensions (WxHxD): 600 x 766 x 641 mm
Net Weight: 49.5kg