- 350 Watts peak
- 90 H x 60 V horn delivers greater coverage
- 8-inch LF driver, 1.4-inch voice coil
- 1-inch titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control

- 350 Watts peak
- 90 H x 60 V horn delivers greater coverage
- 10-inch LF driver, 1.5-inch voice coil
- 1-inch titanium diaphragm HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control

- 700 Watts peak Class D power
- 90 H x 60 V horn delivers greater coverage
- 12-inch LF driver, 2-inch voice coil
- 1-inch titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control

- 700 Watts peak Class D power
- 90 H x 60 V horn delivers greater coverage
- 15-inch LF driver, 2-inch voice coil
- 1-inch titanium HF compression driver
- Lightweight, portable design for main or wedge monitor operation
- Standard speaker pole socket
- Bi-amplified design with precision active crossover and EQ
- Balanced XLR Mic/Line input, Link Output and Volume control

900 watts of peak power output
High-efficiency Class D amplifier
Transducer: 12-inch with 2.5-inch high-temperature voice coil
(2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
XLR outputs, with six discreet DSP output modes for ideal matching with companion full-range speaker
Polarity Reverse switch and Extended LF switch for increased EQ control
Electronic clip, thermal and transducer overdrive protection
Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
Rugged, mar-resistant splatter-spray finish always looks good, even with heavy use

- Output Power: 2000 W
- Low-Freq. Driver: 8.0” driver, 2.0” (50 mm) high-temp. voice coil. 1 x 650 W RMS @ 2 Ω
- High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 350 W @ 4 Ω.
- Crossover Freq.: 2 kHz
- Max. SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
- Freq. Response: 62 Hz – 20 kHz (+/-3 dB)
- Freq. Range: 52 Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max. output
- Mic/Inst. Gain/Volume Control Range: to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 900W
- Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)

- Output Power: 2000 W
-Low-Freq. Driver: 10.0” driver, 2.0” (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 Ω
-High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 350 W @ 4 Ω
-Crossover Freq.: 2 kHz
-Max. SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
-Freq. Response: 57 Hz – 20 kHz (+/-3 dB)
-Freq. Range: 48 Hz – 20 kHz (-10 dB)
-Horn Coverage: 90° horizontal x 60° vertical (nominal)
-Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link) ,(1) IEC power cable input
-Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
-Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max. output
-Mic/Inst. Gain/Volume Control Range: to +50 dB
-USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 900W
- Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)

- Output Power: 2500 W
- Low-Freq. Driver: 12.0” driver, 2.5” (63 mm) high-temp. voice coil. 1 x 800 W RMS @ 2 Ω
- High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω
- Crossover Freq.: 2 kHz
- Max. SPL: 132 dB (peak), 129 dB (continuous) (dB-SPL @ 1 m)
- Freq. Response: 53 Hz – 20 kHz (+/-3 dB)
- Freq. Range: 44 Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain/VolumeControl Range: to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 1100W
- Fuse: 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)

- Output Power: 2500 W
- Low-Freq. Driver: 15.0” driver, 2.5” (63 mm) high-temp. voice coil. 1 x 800 W RMS @ 2 Ω
- High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω
- Crossover Freq.: 2 kHz
- Max. SPL: 135 dB (peak), 132 dB (continuous) (dB-SPL @ 1 m)
- Freq. Response: 44 Hz – 20 kHz (+/- 3 dB)
- Freq. Range: 33 Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain/Volume Control Range: to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators:(1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 1100W
- Fuse: 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)

• 2500W of Thunderous Bass
• High-efficiency Class D amplifier
• Transducer: 12-inch/15-inch/18-inch driver with 3-inch high-temperature voice coil
• Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
• Mark-resistant splatter-spray finish always looks good, even with heavy use
• Electronic clip, thermal and transducer overdrive protection
• (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
• (2) XLR thru outputs for linking
• User-selectable EQ tunings (Off, Live, DJ)
• Phase Alignment selector switch (0°/90°/180°/270°)

• 2500W of Thunderous Bass
• High-efficiency Class D amplifier
• Transducer: 15-inch driver with 3-inch high-temperature voice coil
• Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
• Mark-resistant splatter-spray finish always looks good, even with heavy use
• Electronic clip, thermal and transducer overdrive protection
• (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
• (2) XLR thru outputs for linking
• User-selectable EQ tunings (Off, Live, DJ)
• Phase Alignment selector switch (0°/90°/180°/270°)

• 2500W of Thunderous Bass
• High-efficiency Class D amplifier
• Transducer: 18-inch driver with 3-inch high-temperature voice coil
• Rugged, internally-braced front-ported MDF cabinet with integrated 36mm pole socket
• Mark-resistant splatter-spray finish always looks good, even with heavy use
• Electronic clip, thermal and transducer overdrive protection
• (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
• (2) XLR thru outputs for linking
• User-selectable EQ tunings (Off, Live, DJ)
• Phase Alignment selector switch (0°/90°/180°/270°)

-Power Output: 100 Watts peak, (50 Watts continuous power)
-LF Driver: 8-inch (203.2 mm) woofer
-HF Driver: 3-inch (76.2 mm) tweeter
-Frequency Response: 60 Hz - 20 kHz
-Bluetooth® Connection: Manual pairing or NFC

PORTABLE BATTERY-POWERED 200W SPEAKER WITH 320 DEGREE SOUND

- 320 Degree Sound: Innovative 200W, 5-speaker system fills the room
- 100 hours battery
- Less lifting with telescoping handle and wheels
- Create your own Mix: Built-in 2-channel mic/line/instrument mixer with EQ and FX
- Bluetooth 5.0 enabled streaming and control
- Wireless Control trough Alto Pro Control App on iOS and Android
- Stereo Speaker Link; Expand to two speakers with Bluetooth Linking
- Includes two USB charging ports
- Music and Live Performance EQ presets
- Third Input Additional 3.5mm aux input
- Top storage compartment, side bottle opener and front lighting