Newhank Professional 4×4 HDMI 18Gbps Matrix Switcher with Audio Matrix
NWH-HM4X4
- 4×4 HDMI 18Gbps Matrix Switcher
- Supports 4K/60 4:4:4, HDR, HDCP2.3 compliant
- Audio Matrix, audio out can de-embedded from arbitrary input or output
- Individual volume adjustment on each L+R output
- Supports 4K to 1080p down-scaling up to 2 outputs
- HDMI out provides 2.5W to power Active Optical Cable (AoC)
- HDMI Output support up to 5V500mA for AoC cable
- Controllable by front panel, IR, RS232 and TCP/IP
En rupture de stock temporaire
Home / Product / HM4x4
Search
Video
Video Input: (4) HDMI
Video Input Connector: (4) Type-A female HDMI
Video input Video Resolution: Up to 4K @60Hz 4:4:4
Video Output: (4) HDMI
Video Output Connector: (4) Type-A female HDMI
Video output Video Resolution: Up to 4K@60Hz 4:4:4
HDMI Output: Supports up to 5V500mA for AoC cable
HDMI Version: Up to 2.0
HDCP Version: Up to 2.3
HDMI Audio Signal: LPCM 7.1 audio, Dolby Atmos®, Dolby® TrueHD, Dolby Digital® Plus, DTS:X™, and DTS-HD® Master Audio™ pass-through
Digital Audio Output
Output: (4) Digital SPDIF audio
Output Connector: (4 ) Toslink connector )
Digital SPDIF Audio Format: Supports PCM, Dolby Digital, DTS, DTS-HD
Frequency Response: 20 Hz to 20kHz, ±1dB
Max Output level: ±0.05dBFS
THD+N: < 0.05%, 20 Hz – 20 kHz bandwidth, 1 kHz sine at 0dBFS level (or max level)
SNR: > 90dB, 20Hz-20 kHz bandwidth
Crosstalk Isolation: < -70 dB, 10 kHz sine at 0dBFS level (or max level before clipping)
Noise: -90dB
Analog Audio Output
Output: (4) Analog L/R Audio
Output Connector: (4 ) L&R (RCA)
Digital SPDIF Audio Format: PCM 2CH
Frequency Response: 20 Hz to 20 kHz, ±1dB
Max output level: 2.0Vrms ± 0.5dB. 2V = 16dB headroom above -10dBV (316 mV) nominal consumer line level signal
THD+N: < 0.05%, 20 Hz – 20 kHz bandwidth, 1 kHz sine at 0dBFS level (or max level)
SNR: > 80dB, 20Hz-20 kHz bandwidth
Crosstalk Isolation: < -80 dB, 10 kHz sine at 0dBFS level (or max level before clipping)
L-R Level deviation: < 0.05 dB, 1 kHz sine at 0dBFS level (or max level before clipping)
Frequency Response Deviation: < ± 0.5dB 20Hz - 20KHz
Output Load Capability: 1k ohm and higher (supports 10x paralleled 10k ohm loads)
Noise: -80dB
Control
Control Port : (1) IR EYE, (1) RS232, (1) FIRMWARE, (1) TCP/IP
Control Connector: (1) 3.5mm jack, (1) 3-pin terminal block, (1) USB -A, (1) RJ45