NEXO ELS600 Sub Bass 15" Installation

ELS600

Measuring 423mm high x 531mm wide x 566mm deep and weighing 26.3Kg, the eLS600 sub uses a high excursion 15-inch driver in a cabinet constructed in a bass-reflex design. Constructed from 15mm baltic birch plywood, the cabinet is protected by a strong polyurethane based coating and the Magnelis® front grille is covered by a black UV and fire resistant cloth. Acheiving a peak SPL of 136dB with a frequency range extending down to 40Hz, the eLS600 features convenient rigging points and two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover.

KEY FEATURES

Installation sub with high-excursion 15-inch woofer

Ideal companion to ePS10 installation loudspeaker

Compact design that can be stacked or flown with ePS10 companion main speaker

Discrete, easy to integrate design

Solid construction using 15mm birch plywood enclosure

IP55 protection level

Comprehensive range of accessories for deploying the eLS400 in a wide variety of applications

SPECIFICATIONS

Frequency Response @-6 dB 45 Hz to 150 Hz

Sensitivity 1W@1m 105 dB SPL Nominal

Peak SPL@1m 136 dB

Crossover Frequency 40-85 Hz, 40-120 Hz, 40- 150 Hz

Nominal Impedance 4 Ω

Recommended Power 850 to 1350 Watts / 4 Ohms

FEATURES

LF Component 1 x 15" 4 Ohms long excursion

Connectors 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles)

Compatible cables section Cables from 0.75 mm² to 3.3 mm² (AWG 18 to 12) copper section

Compatible cables outside diameter Cable with maximum outside diameter of 9 mm

Rigging points 4 x pairs of M10 rigging points (two on each side)

Material 15 mm thick birch plywood body and Magnelis® grille

Finish Black structural paint (RAL9005 or Custom RAL upon request)

Front Finish UV & Fire resistant acoustic fabric

Height x Width x Depth 423mm x 531mm x 566mm (16.7" x 20.9" x 22.3")

Weight: Net 26.3 kg (58 lbs)

Operating temperature range 0°C - 40 °C (32° F - 104° F)

Storage temperature range -20 °C - 60 °C (-4 ° F - 140° F)

IP Rating IP54

System Operation

Recommended powering solution NXAMP4x1mk2 Powered TDcontroller: 1 x eLS600 per channel

Optional powering solution DTD + DTDAMP4x1.3: 1 x eLS600 per channel

NXAMP4x2mk2 Powered TDcontroller: up to 2 x eLS600 per channel

NXAMP4x4mk2 Powered TDcontroller: up to 2 x eLS600 per channel