Radial Pro48 active direct box

-Frequency Response: 10 Hz - 100 kHz, ± 0.5 dB @ +0 dBu
-Total Harmonic Distortion: <.05% (typical)
-Dynamic Range: >100 dB (typical)
-Channel Separation: > 80 dB (typical)
-Maximum Input Level: +4, +34 dBu
-Maximum Output Level: +6 dBu (battery powered), +14 dBu (phantom powered)
-Input Connections: ¼-inch TRS | XLR female balanced / unbalanced (2), 470k O
-Thru Connections: ¼-inch TRS

AR-133 has been designed to be more affordable for musicians, studios and PA companies, the unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use.The unit is housed in a rugged aluminium extrusion case

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "flo

The Palmer PAN02 PRO is an active DI-box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of +20 dBu. The Groundlift switch has a "lift" position allowing adjustments between a "soft and hard grounding" . The balanced output is achieved with a h

The Palmer PAN04A is 2-channel DI box for feeding asymmetrical and high impedance electric instrument signals into a mixing deskƒ??s microphone inputs. It delivers a transformer balanced, low impedance signal to the outputs and eliminates mains hum and interference caused by ground loops. The active switch leaves the frequency response unaffected and achieves a high dynamic range. In addition to

Radial - RADACTDI - Active 48V powered DI stereo to mono merge

Radial - RADPASDI - Passive single channel DI with Jensen transformers

Radial - RADPASDI - Passive Stereo DI with Jensen transformers

Radial - RADACTDI - Active stereo PC DI sound cards + consumer electro

Radial - RADPASDI - Passive 2ch DI with 2 Radial transformers

Radial - RADPASDI - Passive direct box with Radial transformer

Passieve DI-Box: slechts 1 exemplaar nodig bij aansluiten van een stereo bron - converteert niet-symmetrische audiosignialen om in een symmertrische lijn voor gebruik van lange kabels zonder storing. - 2 "earth-lift" schakelaars - dankzij de 2 uitstekende audio transformatoren kan je grote signialen aan, breed en lineair frequentiebereik - inputs: COMBO (XLR+JACK) & RCA/cinch