(6) BSS Ar133 - Active Di box - line balancer including Phantom

-Frequency Response: 10 Hz - 100 kHz, ± 0.5 dB @ +0 dBu
-Total Harmonic Distortion: <.05% (typical)
-Dynamic Range: >100 dB (typical)
-Channel Separation: > 80 dB (typical)
-Maximum Input Level: +4, +34 dBu
-Maximum Output Level: +6 dBu (battery powered), +14 dBu (phantom powered)
-Input Connections: ¼-inch TRS | XLR female balanced / unbalanced (2), 470k O
-Thru Connections: ¼-inch TRS

Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for high input impedance ( 1 meg. ohm) and higher input sensitivity (typical difference between in and out -4 dB). Maximum output impedance with phantom power operation +10 dB. Output: transformer balanced. The special "flo

The Palmer PAN02 PRO is an active DI-box with outstanding additional functions. These include an unbalanced XLR input, in addition to the 3-way attenuator -10, -20, -30 dB and a switchable gain of 12 dB, connected with a maximum output voltage of +20 dBu. The Groundlift switch has a "lift" position allowing adjustments between a "soft and hard grounding" . The balanced output is achieved with a h

The Palmer PAN04A is 2-channel DI box for feeding asymmetrical and high impedance electric instrument signals into a mixing deskƒ??s microphone inputs. It delivers a transformer balanced, low impedance signal to the outputs and eliminates mains hum and interference caused by ground loops. The active switch leaves the frequency response unaffected and achieves a high dynamic range. In addition to

Radial - RADACTDI - Active 48V powered DI stereo to mono merge

Radial - RADPASDI - Passive single channel DI with Jensen transformers

Radial - RADPASDI - Passive Stereo DI with Jensen transformers

Radial - RADACTDI - Active stereo PC DI sound cards + consumer electro

Radial - RADACTDI - Active DI, compact 48V phantom powered

Radial - RADPASDI - Passive 2ch DI with 2 Radial transformers

Radial - RADPASDI - Passive direct box with Radial transformer

Passieve DI-Box: slechts 1 exemplaar nodig bij aansluiten van een stereo bron - converteert niet-symmetrische audiosignialen om in een symmertrische lijn voor gebruik van lange kabels zonder storing. - 2 "earth-lift" schakelaars - dankzij de 2 uitstekende audio transformatoren kan je grote signialen aan, breed en lineair frequentiebereik - inputs: COMBO (XLR+JACK) & RCA/cinch