Bells and whistles are great if you need them. If you don’t, you want maximum value from minimum spend.
Open DMX USB gives you just what you want, and need in a USB-based interface for controlling your DMX lights.
Enjoy reliable, no-fuss control of 512 channels, and full compatibility with a range of programs.

Dual, fully independent, DMX ports each with full RDM capability
MIDI input and output ports
Includes micro USB cable and break out cable (DMX only)
Standalone operation for replay of 512 channel lighting shows
One firmware version supports all features
True 1500V isolation separating all DMX ports

- Two bi-directional DMX/ E1.20 RDM ports with optional termination and RDM support
- IEEE 802.3af PoE (Power over Ethernet) or DC 7-24v input
- Surface or TS35 DIN-rail mount
- Support for Art-Net 4, sACN and ESP to DMX conversion
- Support for DMX -> Art-Net (Broadcast or Unicast) / DMX -> ESP (Broadcast or Unicast) / DMX -> sACN (Multicast or Unicast)
- HTP/LTP merging support for up to 2 DMX sources
- Pluggable terminal blocks and inbuilt DMX termination
- Intuitive device configuration and updates through the inbuilt web interface
- Surface or TS35 DIN rail mount
- 10/100 Mbps network speed
- ‘Current Port Buffer’ allows live DMX values to be viewed
- Configurable refresh rate

- 1 x 5 pin XLR DMX ingang
- 2 x 5 pin DMX uitgang
- 2 x 3 pin DMX uitgang
- Bedient tot 512 DMX-kanalen
- Alle uitgangen zijn in tegelijk te gebruiken, in elke combinatie
- Alle uitgangen zijn geisoleerd en beschermen je apparatuur tegen voltagepieken van tot wel 1000V

- 1 x 5 pin XLR DMX ingang
- 4 x 5 pin DMX uitgang
- Bedient tot 512 DMX-kanalen
- Alle uitgangen zijn in tegelijk te gebruiken, in elke combinatie
- Alle uitgangen zijn geisoleerd en beschermen je apparatuur tegen voltagepieken van tot wel 1000V

- 1 DMX/RDM input & 4 DMX/RDM outputs
- 1500V Opto-isolation between each DMX port to protect against stray voltages on the DMX line
- Pluggable screw terminal connectors
- Forward facing LED status indicator to view current DMX/RDM traffic
- Support for DMX512-A and ANSI E1.20 RDM
- Output refresh rate mimics the input
- Electrically insulated case material
- Surface or TS35 DIN rail mount
- No configuration required
- 7V-24V DC power input
- -20°C to 50°C (-4°F to 122°F) operating temperature

Create, record, edit, schedule and play back shows
Record and play up to 32 Universes of sACN or Art-Net
Ideal for home automation projects
User-friendly web interface
Trigger external events using a wide range of devices
Supports remote access over the internet
Onboard LCD menu + USB for backing up shows
Expandable storage using the SD card slot

Create, record, edit and play back shows
Record up to 2 Universes of sACN or Art-Net
Ideal for signage projects
User-friendly web interface
Trigger external events using a wide range of devices
Portable or DIN-rail-mountable

Supports DMX port live recording and playback for 1 full DMX universe of 512 channels.  Records cues from DMX sources with the added convenience of a DMX value monitor.  Creates gradient Effect Cues using the in-built effect generator.  Features user-friendly web interface providing easy configuration options for recording Cues and editing Events/Triggers.  Allows users to create up to 4 Playlists, that comprising a maximum of 4 Cues, including Static, Dynamic, and Effect Cues.  Sends up to 4 automated Events from options: Relays, UDP & OSC.  Supports up to 8 Triggers from options: Digital Inputs, UDP, OSC and a Trigger button on the device.  Offers upgradable firmware to S-PLAY MINI for enhanced capabilities.

An 8-port Ethernet pixel controller! The Pixelator Mini may be small, but it’s powerful enough to control up to 8,192 channels (2,730 RGB Pixels) with perfect synchronisation across all eight of its outputs.

ArtNet 1/2/3
sACN
ESP
Kling-Net
8 x PLink output ports on RJ45 (Pixel Link Data)
1 x 10/100Mbps Ethernet port

The PLink Injector converts PLink data from your Pixelator or Pixelator Mini, to allow you to easily control pixel tape or pixel dots from long distances.
Available for 5V, 12V or 24V systems, with power re-injected from an external source.

The PLink Injector converts PLink data from your Pixelator or Pixelator Mini, to allow you to easily control pixel tape or pixel dots from long distances.
Available for 5V, 12V or 24V systems, with power re-injected from an external source.

- Two 4-universe pixel outputs with Data and Clock support
- Support for up to 8 universes of Art-Net, sACN, KiNet and ESP
- Easily extendable network - daisy chain ethernet connection through multiple devices
- DHCP or Static IP address support
- Multiple pixel protocols supported, see: www.enttec.com/support/supported-led-pixelprotocols/
- Surface or TS35 DIN rail mounting option
- Intuitive device configuration and updates through the inbuilt web interface
- Test/Reset button allows installers to quickly check wiring is correct without requiring a network connection
- Simple Fx generator mode to create and execute preset effects on the fly, configurable to play from power up
- Grouping functionality to reduce input channel count