Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs and Outputs on XLR Jacks on front panels
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Mic or Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
Inputs on Front-Panel XLR Jacks; Outputs on Rear-Panel Terminal Block
Converts Two Standard Mic or Line Audio Sources to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
Each Input is Switch Selectable for Mic or Line

Dante Network Interface for Two Audio Inputs and Two Audio Outputs
XLR and Mini-jack Front-Panel Inputs; Outputs on Rear-Panel Terminal Block
Converts One Mic or Line and One Consumer Line Audio Source to Dante Network Channels
Converts Two Dante Network Audio Signals to Line Level
Special Software Not Required for Module Setup
XLR Input is Switch Selectable for Mic or Line

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB

Dante Network Interface for Four Audio Inputs and Four Audio Outputs
One Mini-jack and Two XLR Front-Panel Inputs
One Mini-jack Front-Panel Output; Two Outputs on Rear-Panel Terminal Block
Converts Two Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB

Dante Network Interface for Four Audio Inputs and Two Audio Outputs
Four XLR Front-Panel Inputs
Converts Four Standard XLR Mic or Line Audio Sources to Dante Network Channels
Each XLR Input is Switch Selectable for Mic or Line
Switch-Selectable Mic Gain: 40 dB, 48 dB or 62 dB
Switch-Selectable 48 V Mic Phantom (P48)
Switch-Selectable Line Gain: Unity, 12 dB or 19 dB

Converts Two Dante Network Audio Signals to Left/Right Digital Audio
AES/EBU or S/PDIF Coaxial or Optical Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Digital Audio Output Sample Rate Equals Dante Sample Rate
Transformer-Isolated AES/EBU Output
Dante Audio Signals Remain in the Digital Domain through the Output
Special Software Not Required for Module Setup

Converts Two Left/Right Digital Audio Sources to Four Dante Network Audio Signals
AES/EBU or S/PDIF Coaxial or Optical Inputs
Supports Input Sampling Rates from 32 kHz to 192 kHz
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Digital Signal Lock Indicator for Valid Inputs
Transformer-Isolated AES/EBU Input

Converts Two Dante Network Audio Signals to two 20 W Outputs into 8 Ohms
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 20 W per channel into 8 Ohms or 15 W per channel into 4 Ohms
Special Software Not Required for Module Setup
LED Indicator for Network Sync
High-Efficiency Class D Operation
Thermal and Short-Circuit Protection

Converts Left and Right USB Audio Channels to two Dante Network Channels
Supports USB Input Sampling Rates of 32 kHz, 44.1 kHz and 48 kHz
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Digital Audio Sources Remain in the Digital Domain through the Dante Network Output
Special Software Not Required for Module Setup
LED Indicator for Valid Power and Network Sync

Converts Two Dante Network Audio Signals to Balanced Analog
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Each Output Switch-Selectable for Mic or Line Level
Normal (-20 dBFS) Line-Level Output is +4 dBu with 20 dB Headroom
Microphone Output Level is Attenuated 50 dB
Each Output is Protected Against Phantom Voltage up to 48 Vdc

16 Watts RMS Constant Voltage Amplifier
70 V or 100 V Output
Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 16 W Output
Automatically limits supply current to protect against PoE+ port shutdown
VCA Control on Detachable Terminal Block

35 Watts RMS Constant Voltage Amplifier
70 V or 100 V Output
Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 35 W Output
Automatically limits supply current to protect against PoE++ port shutdown
VCA Control on Detachable Terminal Block

The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The outputs connect through a stereo 3.5 mm Mini-jack or ¼” (6.35 mm) jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module.

50 Watts RMS Constant Voltage Amplifier
70 V or 100 V Output
Plenum Rated per UL 2043 Standard
Converts One Dante Network Audio Signal to a Mono Constant Voltage Output
Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
0 dBFS Input for 50 W Output
Analog Balanced Mono Input or Unbalanced Stereo Mini-Jack Input
Automatic Ducking Controlled by Network or Analog Input

?The AV-LN4 is an interface that converts four line-level XLR inputs to Dante network audio channels. Special software is not required to configure the AV-LN4. A dual-LED VU meter displays the level for each. The AV-LN4 is a professional grade product for studio quality fidelity and low noise performance.

The AV-LN4 may be powered from an external 24 Vdc power supply, available separately.

Bluetooth Audio Input for Dante Networked System
Consumer Audio Inputs on Mini-Jack or RCA Jacks
Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
Consumer Audio Outputs on Mini-Jack
Balanced and Unbalanced Audio Line Outputs on Rear Panel
Intuitive Single Button Bluetooth Pairing with LED Status Indication
Special Software Not Required for Module Setup

Bluetooth Audio Input for Dante Networked System
Consumer Audio Inputs on Mini-Jack or RCA Jacks
Return Audio Talk Channel from Dante Network to Bluetooth Connected Device
Consumer Audio Outputs on Mini-Jack
Balanced and Unbalanced Audio Line Outputs on Rear Panel
Intuitive Single Button Bluetooth Pairing with LED Status Indication
Special Software Not Required for Module Setup

Konnektor A: 6.3mm female stereo jack
Konnektor B: Open soldeerkontakten
Kleur: Zwart
Kenmerk: Nylon kabelentree
Behuizing: Metaal