Premium Headphones,Dynamic, Closed

Stereo Headphones, Open, 250ohm

Stereo Headphones, Open, 80ohm

Stereo Headphones, Closed, 250ohm

Stereo Headphones, Closed, 80ohm

Stereo Headphones, Semi-open, 250ohm

Stereo Headphones, Semi-open, 80ohm

Stereo Rack Memory Recorder

- Enclosure type: closed
- Unit: 4” full range
- Freq. response: 70 Hz – 15k Hz
- Sound Pressure Level: 85dB / W (1m)
- Max. SPL: 98dB
- Connector: RJ45 (Dante)
- Rated output: 20W
- Distortion (T.H.D.): 0.05% (1kHz / 1W output)
- Residual Noise: -65dBV
- Input Sensitivity: 1/4” TS phone: -14dBV (0.2Vr.m.s.), XLR: +4dBu (1.2Vr.m.s.), XLR(Digital): -12dBFS
- Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

- Enclosure type: closed
- Unit: 4” full range
- Freq. response: 70 Hz – 15k Hz
- Sound Pressure Level: 85dB / W (1m)
- Max. SPL: 98dB
- Connector: 1/4” TS Phone (unbalanced)
- Input Impedance: 10k ohm or more
- Rated output: 20W
- Distortion (T.H.D.): 0.05% (1kHz / 1W output)
- Residual Noise: -70dBV or less
- Input Sensitivity: 1/4” TS phone: -14dBV (0.2Vr.m.s.), XLR: +4dBu (1.2Vr.m.s.), XLR(Digital): -12dBFS
- Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

- Enclosure type: closed
- Unit: 4” full range
- Freq. response: 70 Hz – 15k Hz
- Sound Pressure Level: 85dB / W (1m)
- Max. SPL: 98dB
- Connector Input: XLR-3-31 (IEC 60958 AES/EBU)
- Input Impedance: 110 ohm or more
- Connector Output: XLR-3-32 (IEC 60958 AES/EBU)
- Rated output: 20W
- Distortion (T.H.D.): 0.05% (1kHz / 1W output)
- Residual Noise: -65dBV or less
- Input Sensitivity: 1/4” TS phone: -14dBV (0.2Vr.m.s.), XLR: +4dBu (1.2Vr.m.s.), XLR(Digital): -12dBFS
- Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

- Enclosure type: closed
- Unit: 4” full range
- Freq. response: 70 Hz – 15k Hz
- Sound Pressure Level: 85dB / W (1m)
- Max. SPL: 98dB
- Connector: XLR-3-31 (electrically balanced)
- Input Impedance: 10k ohm or more
- Rated output: 20W
- Distortion (T.H.D.): 0.05% (1kHz / 1W output)
- Residual Noise: -70dBV or less
- Input Sensitivity: 1/4” TS phone: -14dBV (0.2Vr.m.s.), XLR: +4dBu (1.2Vr.m.s.), XLR(Digital): -12dBFS
- Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

- Enclosure type: closed
- Unit: 4” full range
- Freq. response: 70 Hz – 15k Hz
- Sound Pressure Level: 85dB / W (1m)
- Max. SPL: 98dB
- Connector: XLR-3-31 (transformer balanced)
- Input Impedance: 10k ohm or more
- Rated output: 20W
- Distortion (T.H.D.): 0.05% (1kHz / 1W output)
- Residual Noise: -70dBV or less
- Input Sensitivity: 1/4” TS phone: -14dBV (0.2Vr.m.s.), XLR: +4dBu (1.2Vr.m.s.), XLR(Digital): -12dBFS
- Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold level

- Exceptional audio quality - record/playback via Dock connector with built-in AD/DA converter
- Equipped with 3 x stereo inputs (Line/Mic) for using 2 of the 3 simultaneously for vertical or horizontal use
- 2 x plug-in powered condenser cardioid type mics with pop-shields supplied. Third-party mics can also be used.
- 4-dot LED level meter for input monitoring
- Thumb wheel input gain control
- Setup App supplied free from App Store for setting Pan (L/C/R), Low Cut Filter, Limiter, etc.
- Headphone output for recording & playback monitoring
- Long operation time with 2 x AAA alkaline batteries for 8 to 10 hours
- Supplied with a sturdy hand grip
- 2 x threaded tripod mounts on the bottom and side for use with tripod, camera rigs, etc.
- Cold shoe for use of third-party camera option

- Headphone ampli equipped with high-quality sound 32bit-DAC (AK4490) and all discrete circuit
- Supports a sampling freq. of up to 32 bit/192 kHz through in house developed USB driver. In addition, supports DSD 11.2 MHz (ASIO). *DSD playback on Mac is compatible up to 5.6 MHz.
- Eliminates the jitter caused by low accuracy of the source clock of the computer, etc. by using the asynchronous mode of an SPXO for audio (crystal oscillator)
- Equipped with high-quality sound, high-accuracy electronic volume for audio level control
- Equipped with a large capacity toroidal power transformer
- Computers, and digital and analog audio devices can be used as the input source
- Plays DSF files, WAV files and AIFF files on an SD (SDHC) card directly using built-in SD (SDHC) card drive. The drive can also be used for future updates.
- There are several conditions for playback from an SD card. For more information, please refer to "Listening to the files on an SD card" on page 12.
- Equipped with an analog output terminal (RCA pin jack)
- Both the internal clock and the external clock are available for the master clock (only for SPDIF)
- 2x or 4x upsampling function (can also be turned off )
- Switchable digital filter
- 24 level gain settings for headphone output
- Direct analog output that does not pass through the volume
- Equipped with an infrared remote controller
- Equipped with an organic EL display
- Equipped with independent clocks for 44.1K factor and 48K factor

- Digital connection from iPod/iPhone to HP-P1 via 30-pin dock connector
- High quality 32-bit DAC (AKM4480) and headphone amp for max. sound quality
- Lithium-Ion rechargeable battery (approx 7 hours)
- USB powered operation also available
- Hi/Mid/Low 3-step gain control on the headphone out drives all headphone types
- Auxiliary analog Line Input for other MP3 players
- S/PDIF Digital Out for professional recording
- Analog Line Out for connection to an analog amplifier or a recorder
- Unique Digital Filter - use regular filter or unique “min. delay filter” without pre-echo
- Housed in a rigid aluminum alloy chassis

- Quick and easy volume control of the connected powered speakers right next to your PC
- High resolution DAC compatible up to 24bit / 96kHz and audio quality parts realize best performance in this affordable price range.
- Works as a quality headphone amp too
- No external power is required as it works with USB buss power
- No need to install extra driver software both on PC and Mac
- High class looking in silver finish and well-weighted volume knob
- Works right out of box with the supplied USB and RCA pin cable

- Accepts Balanced Analog Input and Dante Input
- Power saving design by the digital amplifier and switching power supply
- 26-dot LED meter indicates either of VU, VU+PEAK, VU+PEAK HOLD, PEAK+PEAK HOLD
- The display brightness can be adjusted in four levels
- Outputs either or both of any 2-channel digital signals extracted from Dante® network signals
- Supported sampling frequencies: 44.1/48/88.2/96 kHz
- Physical dimensions are identical to the conventional RM-3 for easy replacement
- DMM (Dante Domain Manager) ready
- AES67 compatible

- Type: Semi-open
- Impedance: 50 ohm
- Sensitivity: 92dB/mW
- Max Input: 3 000mW
- Freq. response: 15 - 35K Hz
- Weight: Approx. 380g (excluding cable)
- Accessories: ET-RP3.5UB, 3.5mm to 1/4” adapter, carrying pouch, Fostex Logo sticker

- Type: Dynamic
- Frequency Response: 20 – 15 KHz
- Impedance: 16 ohm
- Sensitivity: 93dB/mW
- Max. Input: 50mW
- Plug: 3.5mm stereo mini
- Cable length: 1.2m
- Accessories: ear tips (XS, S, M, L)

- Type: Dynamic
- Frequency Response: 20 – 15 KHz
- Impedance: 16 ohm
- Sensitivity: 93dB/mW
- Max. Input: 50mW
- Plug: 3.5mm stereo mini
- Cable length: 1.2m
- Accessories: ear tips (XS, S, M, L)

- Operation type: Closed type
- Drivers: Dynamic
- Impedance: 16 ohm
- Freq. Response: 10Hz - 20kHz
- Sensitivity: 93 dB (at 1kHz, 1mW)
- Max. Input Power: 5mW
- Plug: 3.5mm stereo mini, L-shape
- Length of cable: 1.2m
- Net Weight: approx. 6g (excluding cable)
- Accessories: Ear tips 4pairs (XS, S, M, L), Carrying pouch
- In-line Controller
- Microphone: Electret condenser type
- Directional Characteristic: Omnidirectional
- Control:Music - Play, Pause, Forward, Back, Phone – On & Off

- Type: Closed, Dynamic
- Driver: 50mm Neodymium magnet / Bio-dyna diaphragm
- Impedance: 25 ohm
- Sensitivity: 98dB / mW
- Max. Input Power: 1,800 mW
- Freq. Response: 5Hz – 45kHz
- Weight: approx. 375g (excluding the cable)
- Connector: 2-pin (gold-plated with rhodium over-coated)
- Cable: 3m Hi-FC (detachable 2-pin, rhodium coated)
- Jakck: 1/4” stereo unbalanced, gold-plated
- Accessories: Leatherette carrying bag

- Type: Closed Dynamic
- Drivers: 40mm
- Impedance: 70 Ohm
- Freq. Response: 10Hz–35kHz
- Sensitivity: 100 dB (@ 1kHz, 1mW)
- Max. Input Power: 100mW
- Plug: 3.5mm Gold-Plated Stereo Mini
- Cable Length: 1.2m
- Weight: 265g

- Driver: Dynamic, 50mm
- Operation type: Closed
- Impedance: 25 ohm
- Sensitivity: 100dB (at 1kHz, 1mW)
- Freq. Response: 5Hz – 45kHz
- Max. Input Power: 1,800 mW
- Weight: 390g (excluding the cable)
- Cable: Detachable 3m 1/4” unbalanced stereo phone (model ET-H3.0N7UB)
- Accessories: Headphone stand, Carrying bag

- Neodymium magnet drive with 1.5 Tesla magnetic flux density for impressive dynamics
- Biodyna membrane for fine-drawing high audio resolution and sound reproduction
- Case made of Japanese ornamental cherry birch with excellent acoustic properties
- Urushi lacquer finish in traditional handwork
- Synthetic leather earpads with low-resilience urethane padding
- Cable made of 7N OFC copper (99.99%) and robust duralumin housing
- Dynamic
- Driver: 50 mm neodymium magnet / 'Bio-Dynamic' membrane
- Impedance: 25 ohms
- Sensitivity: 100dB / mW
- Maximum input: 1,800 mW
- Frequency range: 5 - 45,000 Hz
- 6.3 mm Unbalanced stereo jack
- With removable cable
- Cable length: 3 m
- Weight: 390 g (without cable)
- Elegant headphone stand included