3.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
50W, Class AB dual amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)
Comes with speaker wire, ⅛-inch TRS to stereo RCA cable, and stereo ⅛-inch TRS to ⅛-inch TRS cable

3.5-inch, woven-composite, low-frequency transducer
1-inch (25 mm), ultra-low-mass, silk-dome, high-frequency transducer
Fast, reliable, stereo Bluetooth® 5.0 wireless input
50W (25W/side) Class AB amplification
80 Hz to 20 kHz frequency response
98 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

4.5-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetooth® 5.0 wireless input
50W, Class AB dual amplification
70 Hz to 20 kHz frequency response
100 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

5.25-inch, woven-composite, low-frequency driver
1-inch, ultra-low mass, silk-dome, high-frequency driver
Fast, reliable stereo Bluetooth® 5.0 wireless input
100W, Class D dual amplification
55 Hz to 20 kHz frequency response
104 dB SPL (Peak, @ 1 meter)
High- and low-frequency Acoustic Tuning controls
Balanced, ¼-inch TRS inputs; unbalanced, ⅛-inch stereo and RCA inputs; and integrated stereo headphone amplifier with front-panel ⅛-inch output
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

Eris Studio 4: Compact, powerful studio monitor with 4.5-inch low-frequency transducer, 1-inch silk-dome high-frequency transducer, wide sweet spot, and Acoustic Tuning controls for exceptional audio in home studios and small mix rooms.

Introducing the Eris Studio 5: A powerful studio monitor featuring a 5.25-inch low-frequency driver, 1-inch silk-dome high-frequency driver, 100˚ x 60˚ EBM waveguide, and 80W Class AB dual amplification, providing exceptional bass reproduction, precise audio, and versatile acoustic tuning controls, making it ideal for studio environments.

The Eris Studio 8 excels in precision, headroom, and Acoustic Tuning, making it a sought-after studio monitor. This update refines low and high frequencies, perfect for home studios and pro mix rooms. The custom EBM waveguide ensures dispersion, while the 8-inch woven-composite driver and 140W biamped power provide signature bass down to 35 Hz, no subwoofer needed.

8-inch composite low-frequency driver
Bluetooth® 5.0 wireless audio stereo input
50W RMS, Class AB power amplifier
30 Hz to 200 Hz frequency response
100 dB SPL (Peak, @ 1 meter)
Input gain control (-30 dB to +6 dB, continuously variable)
Continuously variable lowpass filter (50 Hz to 130 Hz)
Defeatable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Eris® Sub 8BT outputs to the main speakers
Left and right, balanced ¼-inch TRS and unbalanced RCA main inputs
Left and right, balanced ¼-inch TRS and unbalanced RCA pass-through outputs for connecting satellite speakers

Single point-source coaxial design for wider sweet spot and better phase alignment
6.5-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
106 dB SPL (Peak, @ 1 meter)
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes)

Single point-source coaxial design for wider sweet spot and better phase alignment
8-inch, woven-composite, low-frequency driver
1.25-inch, silk-dome, high-frequency driver
140W, Class AB amplification
35 Hz to 20 kHz frequency response
108 dB SPL (Peak, @ 1 meter
Acoustic Tuning Controls: Acoustic Space (Flat, -2 dB, -4 dB), High Frequency (±6 dB, center 10 kHz, continuously variable), Mid Frequency (±6 dB, center 1 kHz, continuously variable), Low Cut (Flat, 80 Hz, 100 Hz @ -12 dB / octave)
XLR and ¼-inch TRS balanced and RCA unbalanced rear-panel inputs
Protection: RF interference, output-current limiting, over-temperature, turn-on/off transient, subsonic filter
Power Saver mode (engages after 40 minutes of no audio)

10-inch, front-firing, glass-composite, low-frequency transducer
Front-firing, bass-reflex acoustic port
Continuously variable lowpass filter (50 Hz to 130 Hz) sets the upper frequency reproduced by the subwoofer
Switchable highpass filter removes frequency content below 80 Hz from the full-range subwoofer outputs to the main monitors
Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
Input gain control (-30 dB to +6 dB, continuously variable), polarity invert switch, and ground-lift switch
170 watt (RMS), Class AB amplification for up to 113 dB SPL, with a frequency response of 20 to 200 Hz
Left and right, balanced XLR and ¼-inch TRS and unbalanced RCA main inputs
Left and right balanced XLR and ¼-inch TRS outputs and XLR subwoofer output for connecting a second Eris® Pro Sub 10