NIEUW! Alto Professional TS4 luidsprekers!

- Output Power: 2000 W
- Low-Freq. Driver: 8.0” driver, 2.0” (50 mm) high-temp. voice coil. 1 x 650 W RMS @ 2 Ω
- High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 350 W @ 4 Ω.
- Crossover Freq.: 2 kHz
- Max. SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
- Freq. Response: 62 Hz – 20 kHz (+/-3 dB)
- Freq. Range: 52 Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max. output
- Mic/Inst. Gain/Volume Control Range: to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 900W
- Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application, suspended with integral M6 points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)

- Output Power: 2000 W
-Low-Freq. Driver: 10.0” driver, 2.0” (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 Ω
-High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 350 W @ 4 Ω
-Crossover Freq.: 2 kHz
-Max. SPL: 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m)
-Freq. Response: 57 Hz – 20 kHz (+/-3 dB)
-Freq. Range: 48 Hz – 20 kHz (-10 dB)
-Horn Coverage: 90° horizontal x 60° vertical (nominal)
-Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link) ,(1) IEC power cable input
-Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
-Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max. output
-Mic/Inst. Gain/Volume Control Range: to +50 dB
-USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 900W
- Fuse: 100-120V T10AL AC250V; 220-240V T5AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)

- Output Power: 2500 W
- Low-Freq. Driver: 12.0” driver, 2.5” (63 mm) high-temp. voice coil. 1 x 800 W RMS @ 2 Ω
- High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω
- Crossover Freq.: 2 kHz
- Max. SPL: 132 dB (peak), 129 dB (continuous) (dB-SPL @ 1 m)
- Freq. Response: 53 Hz – 20 kHz (+/-3 dB)
- Freq. Range: 44 Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain/VolumeControl Range: to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators: (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 1100W
- Fuse: 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)

- Output Power: 2500 W
- Low-Freq. Driver: 15.0” driver, 2.5” (63 mm) high-temp. voice coil. 1 x 800 W RMS @ 2 Ω
- High-Freq. Driver: 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 450 W @ 4 Ω
- Crossover Freq.: 2 kHz
- Max. SPL: 135 dB (peak), 132 dB (continuous) (dB-SPL @ 1 m)
- Freq. Response: 44 Hz – 20 kHz (+/- 3 dB)
- Freq. Range: 33 Hz – 20 kHz (-10 dB)
- Horn Coverage: 90° horizontal x 60° vertical (nominal)
- Connectors: (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced), (1) XLR output (Link), (1) IEC power cable input
- Input Impedance Line: 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K
- Line Gain/Volume Control Range: to 0 dB, +4 dBu nominal, +10 dBu for max output
- Mic/Inst. Gain/Volume Control Range: to +50 dB
- USB Charging Port: 5V 2.1A
- Controls: Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Bluetooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button
- Indicators:(1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped), (1) Bluetooth LED (Blue), (1) Link LED (Orange), (4) DSP Presets LED (Green), (3) HPF LED (Green)
- Power Connection: IEC
- Voltage: 100-120V, 50/60Hz; 220-240V, 50-60Hz
- Consumption: 1100W
- Fuse: 100-120V T15AL AC250V; 220-240V T6.3AL AC250V
- Protection: Electronic clip, thermal, and transducer overdrive protection
- Enclosure: Injected Molded Enclosure and Perforated Metal Grille
- Mounting/Installation: Standard 36 mm pole socket, flown application with integral M10 suspension points, or in a wedge monitor position
- Operating Temp.: -10°C to 45°C (14°F to 113°F)