Product Type: IPX6 Wireless Portable Speaker
Frequency Response (-6dB): 80Hz - 16kHz
RMS Power: 30W
Wireless Connection System: BT v5.0
Wireless Range: Up to 18m (59ft)
Full-Range Driver: 2 x 3" Full-Range Loudspeakers
Subwoofer Driver: 2 x 82mm Passive Radiators
Audio Signal Inputs: BT | AUX | Micro SD
Input Connectors: 3.5mm Stereo Jack | Micro SD Slot
Power Input: DC 5V - 2.4A
Special Features: Hands-Free Calls
Battery Type: Lithium-ion, Rechargeable - 18Wh (equivalent to 3.6V, 5000mAh)
Bat. Playback Time: Up to 15 Hours
Bat. Charging Time: 5 Hours
Construction: High Grade Polished Polymer
IP Rating: IPX6 - Waterproof
Dimensions (WxHxD): 300 x 160 x 102mm (11.8 x 6.3 x 4 in)
Net Weight: 1.3kg (3lb)
Shipping Weight: 1.8kg (3.9lb)

Product Type: Portable Soundbar
Frequency Response (-6dB): 100Hz - 20kHz
RMS Power: 20W (2x10W)
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Full-Range Driver: 2 x 2" Full-Range Loudspeakers
Subwoofer Driver: 2 x Passive Radiators
Audio Signal Inputs: BT | AUX | Micro SD | USB | FM Radio
Input Connectors: 3.5mm Stereo Jack | USB A Type | Micro SD Slot
Power Input: DC 5V - 1A
Special Features: Remote Control | Hands-Free Calls
Battery Type: Rechargeable - 4000mAh (Lithium-ion)
Bat. Playback Time: 6 Hours
Bat. Charging Time: 3 to 4 Hours
Construction: High Grade Polished Polymer
Dimensions (WxHxD): 420 x 73 x 65mm (16.5" x 2.8" x 2.5")
Net Weight: 900g (1.9lb)
Shipping Weight: 1.2kg (2.6lb)

Product Type: Portable Soundbar
Frequency Response (-6dB): 100Hz - 20kHz
RMS Power: 20W (2x10W)
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Full-Range Driver: 2 x 2" Full-Range Loudspeakers
Subwoofer Driver: 2 x Passive Radiators
Audio Signal Inputs: BT | AUX | Micro SD | USB | FM Radio
Input Connectors: 3.5mm Stereo Jack | USB A Type | Micro SD Slot
Power Input: DC 5V - 1A
Special Features: Remote Control | Hands-Free Calls
Battery Type: Rechargeable - 4000mAh (Lithium-ion)
Bat. Playback Time: 6 Hours
Bat. Charging Time: 3 to 4 Hours
Construction: High Grade Polished Polymer
Dimensions (WxHxD): 420 x 73 x 65mm (16.5" x 2.8" x 2.5")
Net Weight: 900g (1.9lb)
Shipping Weight: 1.2kg (2.6lb)

- Product Type: Wireless Headphones with Microphone
- Freq. Response (-6dB): 20Hz - 20kHz
- Wireless Connection System: Bluetooth v5.0 - A2DP/AVRCP/HSP/HFP
- Wireless Range: 10m (32.8ft)
- Full-Range Driver: 40mm Full-Range Driver
- Audio Signal Inputs: Stereo Bluetooth, AUX, Micro SD Card, FM Radio
- Input Connectors: 3.5mm Stereo Jack, Micro SD Slot
- Power Input: DC 5V - 1A
- Special Features: Hands-Free Calls, Wired and Wireless Connection, 90º Ear-Muff Rotation
- Battery Type: Rechargeable - 400mAh (Lithium-ion)
- Bat. Playback Time: Up to 18 Hours
- Bat. Charging Time: 2.5 Hours

Product Type: Wireless Headphones with Microphone
Frequency Response (-6dB): 20Hz - 20kHz
Wireless Connection System: BT v5.0 - A2DP/AVRCP/HSP/HFP
Wireless Range: 10m (32.8ft)
Full-Range Driver: 40mm Full-Range Driver
Audio Signal Inputs: Stereo BT | AUX | Micro SD Card | FM Radio
Input Connectors: 3.5mm Stereo Jack | Micro SD Slot
Power Input: DC 5V - 1A
Special Features: Hands-Free Calls | Wired and Wireless Connection | 90º Ear-Muff Rotation
Battery Type: Rechargeable - 400mAh (Lithium-ion)
Bat. Playback Time: Up to 18 Hours
Bat. Charging Time: 2.5 Hours
Dimensions (WxHxD): 199 x 176 x 50mm (7.83" x 6.93" x 1.97")
Net Weight: 186g (0.41lb)
Shipping Weight: 350g (0.77lb)
Accessories: Free Protective Bag Included

Product Type: BT Class D Amplifier
Frequency Response (-6dB): 20Hz - 20kHz
Amplifier Technology: Class D Amplifier
Amplifier Power: 2 x 30W@8Ω
Speaker Output: 8Ω - 16Ω
THD+N: <0.1%
SNR (Signal to Noise Ratio): >82dB
Input Sensitivity: 0dBV (0.7V)
Wireless Connection System: BT v2.1 + EDR
Wireless Range: 10m (32.8ft)
Audio Signal Inputs: BT | Stereo Line-in
Input Connectors: 3.5mm Stereo Jack
Cooling Type: Convection
Power Input: AC 100V-240V / 50Hz-60Hz
Power Consumption: 0.24W - Idle
Construction: Aluminum
IP Rating: Indoor Use
Dimensions (WxHxD): 100 x 35 x 125mm (3.9" x 1.4" x 4.9")
Fixation: Screw Fixation to Wall / Ceiling
Net Weight: 330g (0.73lb)
Shipping Weight: 350g (0.77lb)

Product Type: Class D Amplifier with BT
Frequency Response (-6dB): 20Hz - 20kHz
Amplifier Technology: Class D Amplifier
Amplifier Power: 2 x 160W@4Ω | 2 x 100W@8Ω
Speaker Output: 4Ω - 16Ω
THD+N: <0.1%
SNR (Signal to Noise Ratio):>90dB
Input Sensitivity:0.7Vrms
Wireless Connection System: BT v4.1 aptX
Wireless Range: >10m (32.8ft)
Audio Signal Inputs: BT | Audio Line-in
Input Connectors: 1 x Stereo RCA
Output Connectors: Gold Plated Binding Posts
Cooling Type: Convection
Power Input: Power Supply: AC 110V - 240V | DC 36V - 4.5A
Power Consumption: 160W
Construction: Aluminum
IP Rating: Indoor Use
Dimensions (WxHxD): 117 x 39 x 211mm (4.6" x 1.5" x 8.3")
Net Weight: 0.65kg (1.4lb)
Shipping Weight: 1.4kg (3.1lb)
- Power Input: Power Supply: AC 110V - 240V, DC 36V - 4.5A
- Power Consumption: 160W

Product Type: Digital Mixing Console (USB Audio Interface)
Mixer: 4 Channels (2 x Mono | 1 x Stereo)
DSP Technology: 24bit | 192kHz
Effects: Ambience, Bathroom, Room, Plate, Spring, Hall, Warehouse, Cathedral, Gated Reverb, Chorus, Chorus Reverb, Phaser, Phaser Reverb, Flanger, Flanger Reverb, Rotary, Delay
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Audio Signal Inputs: BT | Microphone (+48V) | Instrument (HI-Z) | USB | AUX | CD Player | PC (2 Channels)
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x USB | 1 x Stereo RCA | 1 x USB 2.0
Audio Signal Outputs: Main Output | Headphones | PC (2 Channels)
Output Connectors: 2 x Balanced TRS | 1 x 3.5mm Stereo Jack | 1 x USB 2.0
Power Input: Power Supply: AC 100V - 240V 50Hz/60Hz | DC 5V - 2A
Power Consumption: 10W (2A)
Special Features: HI-Z, Low Cut, EQ (LOW, MID, HIGH), Phantom Power (+48V), Effects, USB Stick Recording, PC Recording
Construction: Reinforced Plastic
Dimensions (WxHxD): 153 x 64 x 175mm (6 x 2.5 x 6.9 in)
Net Weight: 0.6kg (1.3lb)
Shipping Weight: 0.9kg (2lb)

Product Type: High Power Portable Speaker
Frequency Response (-6dB): 60Hz - 20kHz
RMS Power: 65W
Program Power: 130W
Wireless Connection System: BT v4.2 + EDR + BLE
Wireless Range: 10m (32.8ft)
Subwoofer Driver: 1 x 6" Subwoofer
Low Frequency Driver: 2 x 3" Woofer
High Frequency Driver: 2 x 1" Tweeter
Audio Signal Inputs: Stereo BT | AUX
Input Connectors: 1 x 3.5mm Stereo Jack
Audio Signal Outputs: Stereo BT Transmission to another MV3 (TWS)
Output Connectors: 1 x USB A Type Port
Power Input: Power Supply: AC 100V - 240V 50Hz/60Hz | DC 12V - 3A
Special Features: NFC Pairing | TWS | USB Charger 5V - 2A
Battery Type: Rechargeable - 7.4V / 6600mAh (Lithium-ion)
Bat. Playback Time: Up to 20 Hours
Bat. Charging Time: 4 Hours
Dimensions (WxHxD): 178 x 425 x 178mm (7" x 16.7" x 7")
Net Weight: 4.2kg (9.3lb)
Shipping Weight: 4.6kg (10.1lb)
Accessories: Transportation Bag for MV3 (not Included)

Product Type: Battery Powered Portable Speaker
Frequency Response (-6dB): 70Hz - 20kHz
Nominal Coverage (-6dB): 100º H x 80º V
Program Power: 100W
Peak Power: 200W
Amplifier Technology: Class D Amplifier with DSP
Mixer: 3 Channels
DSP Presets: Tone Optimizer for Microhpone/Guitar | Automatic EQ on Speaker Stand
Wireless Connection System: BT v5.0 with TWS (True Wireless Stereo)
Wireless Range: 10m (32.8ft)
Maximum SPL (calculated): 116dB
Low Frequency Driver: 6.5" Woofer | 2" Voice Coil
High Frequency Driver: 1" High Frequency Driver
Audio Signal Inputs: BT | Microphone | Instrument | USB | AUX
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x USB
Audio Signal Outputs: Mixer Output
Output Connectors: 1 x TRS 6.35mm Jack
Cooling Type: Convection
Power Input: AC 100V - 240V 50Hz/60Hz
Power Consumption: 100W (0.4A)
Special Features: USB Charging Port: 5V /1A
Battery Type: Lithium-Ion Rechargeable Battery - 5000mAh
Bat. Playback Time: Up to 12 Hours
Bat. Charging Time: 5 Hours
Fittings: 35mm Pole Mount Socket
Handles: One on Top
Construction: Light-Weight ABS Plastic
Dimensions (WxHxD): 258 x 342 x 283mm (10.2 x 13.5 x 11.1 in)
Net Weight: 7.2kg (15.9lb)
Shipping Weight: 7.9kg (17.4lb)
Accessories: MV6 Protective Cover (not included)

Product Type: Active Portable Speaker
Frequency Response (-6dB): 53Hz - 19.5kHz
Nominal Coverage (-6dB): 90º H x 60º V
Program Power: 550W
Peak Power: 1100W
Amplifier Technology: Class D Amplifier with DSP
Mixer: 2 Channels
DSP Presets: Flat | Music | External Subwoofer | Monitor | Voice
Wireless Connection System: BT v4.0
Wireless Range: 10m (32.8ft)
Maximum SPL (calculated): 124dB
Low Frequency Driver: 12" Woofer | 2" Voice Coil
High Frequency Driver: 1" Titanium Driver | 1.75" Voice Coil
Audio Signal Inputs: BT | Microphone | Instrument | CD Player | AUX
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x Stereo RCA
Audio Signal Outputs: Mixer Output
Output Connectors: 1 x XLR
Cooling Type: Convection
Power Input: AC 100V - 240V 50Hz/60Hz
Power Consumption: 550W (2.3A)
Fittings: 2 x 35mm Pole Mount Sockets (Straight + 8º Tilted)
Handles: Two on Back
Construction: Strengthen PP Plastic
Dimensions (WxHxD): 368 x 513 x 343mm (14.5" x 20.2" x 13.5")
Net Weight: 15.7kg (34.6lb)
Shipping Weight: 17.2kg (37.9lb)
Accessories: MV12 Protective Cover (not included)

BAG FOR MV3

Product Type: Mixer Amplifier with BT
Frequency Response (-6dB): 80Hz - 16kHz
Amplifier Technology: D Class Amplifier
Amplifier Power: 120W
Speaker Output: 100V
THD+N: <0.5%
SNR (Signal to Noise Ratio): Mic: >74dB | Line-in: >80dB
Input Sensitivity: Mic: 60mV (±15mV) | Line-in : 300mV(±20mV)
Mixer: 3 Channels
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Audio Signal Inputs: BT | Microphone | CD Player | USB
Input Connectors: 1 x Stereo RCA | 1 x MIC (TS) | 1 x MIC or AUX (XLR) | 1 x Line-in (Phoenix Connector) | 1 x 100V IN (Phoenix Connector) | 1 x USB A Type
Audio Signal Outputs: Line Audio
Output Connectors: 1 x Stereo RCA
Protections: DC Voltage | Overload | Short-Circuit
Cooling Type: Speed Controlled Fan
Power Input: AC 180V - 250V / 50Hz - 60Hz and/or DC 24V - 6A
Power Consumption: 150W
Special Features: Ducking | Priority Mic. | Phantom Power (+48V) | Bass Adjust.: ±10dB (100Hz) | Treble Adjust.: ±10dB (10kHz)
Construction: Aluminum / Steel
IP Rating: Indoor Use
Dimensions (WxHxD): 200 x 44 x 190mm (7.9" x 1.7" x 7.5")
Net Weight: 1.5kg (3.3lb)
Shipping Weight: 2kg (4.4lb)

Product Type: Multi-Zone Mixer Amplifer with built in usb/sd card reader and fm tuner
Frequency Response (-6dB): 80Hz - 16kHz
Amplifier Technology: AB Class Amplifier
Amplifier Power: 350W
Speaker Output: 100V | 4Ω - 16Ω
Zones Output: 6 Zones
THD+N: <1%
SNR (Signal to Noise Ratio): Mic: >71dB | Line-in: >85dB
Input Sensitivity: Mic: 3mV (±0.5mV) | Line-in : 300mV(±50mV)
Mixer: 7 Channels
Audio Signal Inputs: Microphone | CD Player | USB | SD Card | FM Radio | BT
Input Connectors: 3 x Stereo RCA | 4 x MIC (TS) | USB | SD Card Slot | FM Antenna (75Ω)
Audio Signal Outputs: Line Audio
Output Connectors: 1 x Stereo RCA
Speakers Output Connectors: Low Impedance: Binding Posts | 100V: Screw Connector
Protections: DC Voltage | Overload | Short-Circuit
Cooling Type: Speed Controlled Fan
Power Input: AC 220V - 240V / 50Hz - 60Hz
Power Consumption: 650W (3A)
Special Features: Chime | Ducking | Priority Microphone | Bass Adjust.: ±10dB (100Hz) | Treble Adjust.: ±10dB (10kHz)
Fittings: 2U 19" Rack
Handles: Two on Front
Construction: Aluminum / Steel
IP Rating: Indoor Use
Dimensions (WxHxD): 483 x 88 x 338mm (19" x 3.5" x 13.3")
Net Weight: 16kg (35.3lb)
Shipping Weight: 17kg (37.5lb)

Product Type: 2-Way Premium Ceiling Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 40W (8Ω)
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω (Transformer bypass)
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 109dB
Transformer Taps 100V: 2.5W | 5W | 10W
Transformer Taps 70V: 1.25W | 2.5W | 5W
Low Frequency Driver: 5.25" Reinforced Polymer Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Titanium Dome Tweeter
Input Connectors: Gold Plated Binding Posts (8Ω) / Quick Release Connector (100V)
Recommended Amplifier: A40 | A200 | MX120 | MX350
Special Features: Adjustable Environment Equalizer (±3dB)
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 204mm x 78mm (8" x 3.1")
Cutout Diameter: 179mm (7")
Mounting Depth: 78mm (3.1")
Wall / Ceiling Thickness: 3mm to 15mm (0.12" to 0.59")
Fixation: Plastic Clamps for Ceiling Fixation
Net Weight: 1.2kg (2.6lb)
Shipping Weight: 1.5kg (3.3lb)
Accessories: Black Frameless Magnetic Grille (not included)

Low Frequency Driver: 6.5" Reinforced Polymer Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Titanium Dome Tweeter
Frequency Response (-6dB): 65Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (Transformer bypass)
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 110.8dB
Transformer Taps 100V: 7.5W | 15W | 30W
Transformer Taps 70V: 3.75W | 7.5W | 15W
Input Connectors: Gold Plated Binding Posts (8Ω) / Quick Release Connector (100V)
Special Features: Adjustable Environment Equalizer (±3dB)
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 234mm x 87mm (9.21" x 3.43")
Cutout Diameter: 210mm (8.3")
Mounting Depth: 87mm (3.4")
Wall / Ceiling Thickness: 3mm to 15mm (0.12" to 0.59")
Fixation: Plastic Clamps for Ceiling Fixation
Net Weight: 1.79kg (3.94lb)

Full-Range Driver: 6.5" Dual Cone Woofer
Transformer Taps 100V: 1.5W | 3W | 6W
Transformer Taps 70V: 0.75W | 1.5W | 3W
Frequency Response (-10dB): 70Hz - 16kHz
Nominal Coverage (-6dB): 85º Conical
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 97.8dB
IP Rating: Indoor Use
Grille: White Aluminum Frameless Grille RAL9003 (Paintable) | Detachable Logo
Dimensions (ØxD): 190mm x 79mm (7.48" x 3.11")
Cutout Diameter: 170mm (6.7")
Mounting Depth: 80mm (3.15")
Wall / Ceiling Thickness: 5mm to 35mm (0.2" to 1.38")
Net Weight: 0.67kg (1.5lb)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount / Garden Mount (not included)
Net Weight: 1.6kg (3.53lb)
Shipping Weight: 2.4kg (5.29lb)
Accessories: Wall Bracket for P4 (not included) | Garden Accessory for P4 (not included)

- Product Type: Full-Range Pendant Speaker (8Ω/100V)
- Freq. Response (-6dB): 90Hz - 20kHz
- Nominal Coverage: 90º Conical
- RMS Power: 40W
- Program Power: 80W (8Ω)
- Nominal Impedance: 8Ω
- Sensitivity (1W, 1m): 85dB
- Max. SPL (calculated): 104dB
- Transformer Taps 100V: 5W, 10W, 20W, 40W
- Transformer Taps 70V: 2.5W, 5W, 10W, 20W
- Low Freq. Driver: 6,5" Polypropylene Cone Woofer
- High Freq. Driver: 1" Silk Dome Tweeter
- Input Connectors: Phoenix Type Pluggable Terminal Block
- Recommended Amplifier: MX120, MX350
- Grille: Alu Grille, Detachable Logo
- Product Material: High-grade Rugged Polypropylene
- Dimensions: 208 x 280 x 208mm
- Net weight: 3kg
- IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount (not included)
Net Weight: 1.6kg (3.53lb)
Shipping Weight: 2.4kg (5.29lb)
Accessories: Wall Bracket for P4W (not included)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket)
Dimensions (WxHxD): 208 x 280 x 208mm (8.2 x 11 x 8.2 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount (not included)
Net Weight: 3kg (6.61lb)
Shipping Weight: 4kg (8.82lb)
Accessories: Wall Bracket for P6W (not included)

Product Type: Full-Range Wall Speaker
Frequency Response (-6dB): 100Hz - 20kHz
Nominal Coverage (-6dB): 110º H x 110º V
RMS Power: 25W
Program Power: 50W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 106dB
Low Frequency Driver: 5.25" Inverted Magnet Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Spring Loaded Terminal
Recommended Amplifier: A40 | A200
Special Features: Ultra-Slim Design
Fittings: Hanging Hole
Grille: Acoustic Transparent Grille | Detachable Logo
Construction: ABS Plastic
IP Rating: Indoor Use
Dimensions (WxHxD): 183 x 271 x 38mm (7.2" x 10.67" x 1.5")
Fixation: Picture Frame Hanging Type
Net Weight: 0.9kg (1.98lb)
Shipping Weight: 2.2kg (4.85lb)

Product Type: Full-Range Wall Speaker
Frequency Response (-6dB): 100Hz - 20kHz
Nominal Coverage (-6dB): 110º H x 110º V
RMS Power: 25W
Program Power: 50W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 106dB
Low Frequency Driver: 5.25" Inverted Magnet Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Spring Loaded Terminal
Recommended Amplifier: A40 | A200
Special Features: Ultra-Slim Design
Fittings: Hanging Hole
Grille: Acoustic Transparent Grille | Detachable Logo
Construction: ABS Plastic
IP Rating: Indoor Use
Dimensions (WxHxD): 183 x 271 x 38mm (7.2" x 10.67" x 1.5")
Fixation: Picture Frame Hanging Type
Net Weight: 0.9kg (1.98lb)
Shipping Weight: 2.2kg (4.85lb)

Product Type: Mini Satellite Passive Speaker
Frequency Response (-6dB): 150Hz - 20kHz
Nominal Coverage (-6dB): 120º Conical
RMS Power: 15W
Program Power: 30W
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 87dB
Maximum SPL (calculated): 102dB
Full-Range Driver: 2.75" Full-Range Loudspeaker
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200
Special Features: Built-in High-Pass Filter
Grille: Acoustic Transparent Plastic Grille
Construction: Rugged ABS Plastic
IP Rating: Indoor Use
Dimensions (WxHxD): 95 x 93 x 108mm (3.7" x 3.7" x 4.3")
Fixation: Ball-Joint Wall Bracket (included)
Net Weight: 0.5kg (1.1lb)
Shipping Weight: 1.2kg (2.6lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 20W
Program Power: 40W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 86dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 140 x 215 x 135mm (5.5" x 8.4" x 5.3") [W4] | 140 x 245 x 158mm (5.5" x 9.6" x 6.2") [W4 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 1.8kg (3.97lb) [W4 + U-Bracket]
Shipping Weight: 4kg (8.82lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 3.75W | 7.5W | 15W | 30W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 205 x 310 x 195mm (8" x 12.2" x 7.6") [W6] | 205 x 345 x 225mm (8" x 13.5" x 8.8") [W6 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 4kg (8.82lb) [W6 + U-Bracket]
Shipping Weight: 8.5kg (18.74lb)

Product Type: 2-Way All-Weather Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 60Hz - 20kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 114.8dB
Transformer Taps 100V: 10W | 20W | 30W | 40W
Low Frequency Driver: 8" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: UV Stabilised High Grade Polypropylene
IP Rating: IP55
Dimensions (WxHxD): 250 x 410 x 260mm (9.8 x 16.1 x 10.2 in) [W8] | 250 x 410 x 290mm (9.8 x 16.1 x 11.4 in) [W8 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 5.8kg (12.79lb) [W8 + U-Bracket]
Shipping Weight: 15kg (33.07lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 20W
Program Power: 40W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 86dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.5" Mylar Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 140 x 215 x 135mm (5.5" x 8.4" x 5.3") [W4] | 140 x 245 x 158mm (5.5" x 9.6" x 6.2") [W4 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 1.8kg (3.97lb) [W4 + U-Bracket]
Shipping Weight: 4kg (8.82lb)

Product Type: 2-Way Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 3.75W | 7.5W | 15W | 30W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A40 | A200 | MX120 | MX350
Construction: High-grade Rugged Polypropylene
IP Rating: Indoor Use
Dimensions (WxHxD): 205 x 310 x 195mm (8" x 12.2" x 7.6") [W6W] | 205 x 345 x 225mm (8" x 13.5" x 8.8") [W6W + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 4kg (8.82lb) [W6W + U-Bracket]
Shipping Weight: 8.5kg (18.74lb)

Product Type: 2-Way All-Weather Passive Speaker (8Ω/100V)
Frequency Response (-6dB): 60Hz - 20kHz
Nominal Coverage (-6dB): 100° H x 100º V
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 114.8dB
Transformer Taps 100V: 10W | 20W | 30W | 40W
Low Frequency Driver: 8" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Binding Posts
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: UV Stabilised High Grade Polypropylene
IP Rating: IP55
Dimensions (WxHxD) :250 x 410 x 260mm (9.8 x 16.1 x 10.2 in) [W8] | 250 x 410 x 290mm (9.8 x 16.1 x 11.4 in) [W8 + U-Bracket]
Fixation: Wall U-Bracket (included)
Net Weight: 5.8kg (12.79lb) [W8 + U-Bracket]
Shipping Weight: 15kg (33.07lb)

Wall Bracket for P4 - Black
Fixation: Screwed to the wall
Special Features: Totally Adjustable Angle

Wall Bracket for P6 - black
Fixation: Screwed to the Wall
Special Features: Adjustable Tilt Angle

Wall Bracket for P4 - white
Fixation: screwed tot the wall
Special Features: totally adjustable angle

Wall Bracket for P6 - White
Fixation: Screwed to the wall
Special Features: Totally adjustable angle

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 120° H x 90º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 107dB
Transformer Taps 100V: 10W | 20W | 40W
Low Frequency Driver: 4" Woofer
High Frequency Driver: 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 140 x 230 x 172mm (5.5 x 9 x 6.8 in)
Fixation: Wall U-Bracket (included)
Net Weight: 2.8kg (6.2lb)
Shipping Weight: 7kg (15.4lb)
Accessories: Ball-Joint Wall Bracket for T4 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 75º V
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 111dB
Transformer Taps 100V: 20W | 40W | 80W
Low Frequency Driver: 6.5" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 182 x 362 x 226mm (7.2 x 14.3 x 8.9 in)
Fixation: Wall U-Bracket (included)
Net Weight: 6.5kg (14.3lb)
Shipping Weight: 15.6kg (34.4lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 90° H x 50º V
RMS Power: 150W
Program Power: 300W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 119dB
Transformer Taps 100V: 37.5W | 75W | 150W
Low Frequency Driver: 8" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 240 x 450 x 287mm (9.4 x 17.7 x 11.3 in)
Fixation: Wall U-Bracket (included)
Net Weight: 10.7kg (23.6lb)
Shipping Weight: 12.2kg (26.9lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 75Hz - 20kHz
Nominal Coverage (-6dB): 120° H x 90º V
RMS Power: 40W
Program Power: 80W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 88dB
Maximum SPL (calculated): 107dB
Transformer Taps 100V: 10W | 20W | 40W
Low Frequency Driver: 4" Woofer
High Frequency Driver: 0.8" Dome Tweeter
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: A200 | MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 140 x 230 x 172mm (5.5 x 9 x 6.8 in)
Fixation: Wall U-Bracket (included)
Net Weight: 2.8kg (6.2lb)
Shipping Weight: 7kg (15.4lb)
Accessories: Ball-Joint Wall Bracket for T4W (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 100° H x 75º V
RMS Power: 80W
Program Power: 160W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 89dB
Maximum SPL (calculated): 111dB
Transformer Taps 100V: 20W | 40W | 80W
Low Frequency Driver: 6.5" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 182 x 362 x 226mm (7.2 x 14.3 x 8.9 in)
Fixation: Wall U-Bracket (included)
Net Weight: 6.5kg (14.3lb)
Shipping Weight: 15.6kg (34.4lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: 2-Way Outdoor Passive Speaker (16Ω/100V)
Frequency Response (-6dB): 60Hz - 18kHz
Nominal Coverage (-6dB): 90° H x 50º V
RMS Power: 150W
Program Power: 300W
Nominal Impedance: 16Ω (low impedance mode)
Sensitivity (1W, 1m): 94dB
Maximum SPL (calculated): 119dB
Transformer Taps 100V: 37.5W | 75W | 150W
Low Frequency Driver: 8" Woofer
High Frequency Driver: 1" Driver
Input Connectors: 4 Pins Screw Connector (IN/OUT)
Recommended Amplifier: MX120 | MX350
Grille: Aluminum Acoustically Invisible
Construction: Weatherproof Plastic Cabinet
IP Rating: IP65
Dimensions (WxHxD): 240 x 450 x 287mm (9.4 x 17.7 x 11.3 in)
Fixation: Wall U-Bracket (included)
Net Weight: 10.7kg (23.6lb)
Shipping Weight: 12.2kg (26.9lb)
Accessories: Hinged Wall Bracket for T6/T8 (not included)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount / Garden Mount (not included)
Net Weight: 1.6kg (3.53lb)
Shipping Weight: 2.4kg (5.29lb)
Accessories: Wall Bracket for P4 (not included) | Garden Accessory for P4 (not included)

- Product Type: Full-Range Pendant Speaker (8Ω/100V)
- Freq. Response (-6dB): 90Hz - 20kHz
- Nominal Coverage: 90º Conical
- RMS Power: 40W
- Program Power: 80W (8Ω)
- Nominal Impedance: 8Ω
- Sensitivity (1W, 1m): 85dB
- Max. SPL (calculated): 104dB
- Transformer Taps 100V: 5W, 10W, 20W, 40W
- Transformer Taps 70V: 2.5W, 5W, 10W, 20W
- Low Freq. Driver: 6,5" Polypropylene Cone Woofer
- High Freq. Driver: 1" Silk Dome Tweeter
- Input Connectors: Phoenix Type Pluggable Terminal Block
- Recommended Amplifier: MX120, MX350
- Grille: Alu Grille, Detachable Logo
- Product Material: High-grade Rugged Polypropylene
- Dimensions: 208 x 280 x 208mm
- Net weight: 3kg
- IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)

Product Type: Full-Range Pendant Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket)
Dimensions (WxHxD): 138 x 190 x 138mm (5.4 x 7.5 x 5.4 in)
Fixation: Eye Bolt for Suspension | Bracket for Wall Mount (not included)
Net Weight: 1.6kg (3.53lb)
Shipping Weight: 2.4kg (5.29lb)
Accessories: Wall Bracket for P4W (not included)

Product Type: Full-Range Garden Speaker (8Ω/100V)
Frequency Response (-6dB): 120Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 20W
Program Power: 40W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 83dB
Maximum SPL (calculated): 99dB
Transformer Taps 100V: 2.5W | 5W | 10W | 20W
Transformer Taps 70V: 1.25W | 2.5W | 5W | 10W
Low Frequency Driver: 4" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120 | MX350
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 190 x 380 x 190mm (7.5 x 15 x7.5 in)
Fixation: Eye Bolt for Suspension | Bracket for Garden Mount
Net Weight: 2.35kg (5.18lb)
Shipping Weight: 3.3kg (7.28lb)

Product Type: Full-Range Garden Speaker (8Ω/100V)
Frequency Response (-6dB): 90Hz - 20kHz
Nominal Coverage (-6dB): 90º Conical
RMS Power: 40W
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω
Sensitivity (1W, 1m): 85dB
Maximum SPL (calculated): 104dB
Transformer Taps 100V: 5W | 10W | 20W | 40W
Transformer Taps 70V: 2.5W | 5W | 10W | 20W
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 1" Silk Dome Tweeter
Input Connectors: Phoenix Type Pluggable Terminal Block
Recommended Amplifier: A40 | A200 | MX120
Grille: Aluminum Grille | Detachable Logo
Construction: High-grade Rugged Polypropylene
IP Rating: IP66 (Only with Back Cover Supplied with Wall Bracket or Garden Accessory)
Dimensions (WxHxD): 234 x 537 x 234mm (9.2" x 21.1" x 9.2")
Fixation: Eye Bolt for Suspension | Bracket for Garden Mount
Net Weight: 3.9kg (8.6lb)
Shipping Weight: 5kg (11lb)

Garden Accessory for P4
Fixation: Buried in the Ground / Screwed to a rigid surface
Speciual Features: Totally adjustable angle

Product Type: Garden Accessory for P6
Special Features: Adjustable Tilt Angle
Dimensions (WxHxD): 234 x 307 x 234mm (9.21" x 12" x 9.21")
Fixation: Buried in the Ground |Screwed to a Rigid Surface

Product Type: 2-Way BT Premium Ceiling Speakers
Frequency Response (-6dB): 62Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (C6B Pro Slave)
Amplifier Power: 30W + 30W (C6B PRO Slave Speaker Output)
DSP Presets: Classical | Vocal Enhance | Flat | Bass Enhance | Bass Cut | Treble Enhance | Treble Cut | Pop | Rock | Jazz
Wireless Connection System: BT v5.0 aptX LL
Wireless Range: >10m (32.8ft)
Maximum SPL (calculated): 107.8dB (2 Coupled Speakers)
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Silk Dome Tweeter
Audio Signal Inputs: Stereo BT | Audio Line-in
Input Connectors: 1 x Stereo RCA (Master Speaker) | Gold Plated Binding Posts (Slave Speaker)
Power Input: Power Supply: AC 100V - 240V | DC 24V- 2.5A Output
Power Consumption: 60W
Special Features: Tool Free Install | Remote Control | 50% Level Limiter | Mono-Stereo Switch
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 234mm x 105mm (9.21" x 4.1")
Cutout Diameter: 209mm (8.2")
Mounting Depth: 102mm (4")
Wall / Ceiling Thickness: 7mm to 20mm (0.28" to 0.79")
Fixation: Specially Designed Dog Legs Ceiling Fixation
Net Weight: Master - 1.5kg (3.3lb) | Slave - 1.5kg (3.3lb)
Shipping Weight: 4.5kg (9.9lb)
Accessories: Black Frameless Magnetic Grille (not included)

Product Type: Convertible Soundbar with BT
Frequency Response (-6dB): 100Hz - 18kHz
RMS Power: 15W + 15W
Amplifier Technology: Class D Amplifier with DSP
DSP Presets: Rock, Pop, Jazz, Live, Club, Dance, Hall, Soft, Flat, Classical
Wireless Connection System: BT v5.0
Wireless Range: >10m (32.8ft)
Full-Range Driver: 4 x 2" Full-Range Loudspeaker
Audio Signal Inputs: Stereo BT | AUX | Optical | USB | Micro SD Card
Input Connectors: 3.5mm Stereo Jack | Optical Cable | USB | Micro SD Slot
Audio Signal Outputs: Subwoofer or Other System Output (Unfiltered, Full-Range)
Output Connectors: 1 x RCA
Power Input: Power Supply: AC 100V - 240V / 50Hz-60Hz | DC 15V - 2A
Power Consumption: 30W
Special Features: Soundbar Convertible into Stereo Sound System (2 Vertical Systems)
Fittings: Plastic Feet | Multi-Directional Hanging Holes
IP Rating: Indoor Use
Dimensions (WxHxD): 980 x 55 x 60mm (38.6" x 2.2" x 2.4") [Soundbar] | 55 x 490 x 60mm (2.2" x 19.3" x 2.4") [Vertical System]
Fixation: Picture Frame Hanging Type
Net Weight: 1.6kg (3.5lb)
Shipping Weight: 2.3kg (5lb)

Product Type: Active Down-Firing Subwoofer
Frequency Response (-6dB): 32Hz - 200Hz
RMS Power: 100W
Program Power: 200W
Speaker Output: High Level Output (needs a pre-amplified signal input)
Subwoofer Driver: 10" Polypropylene Subwoofer
Audio Signal Inputs: Stereo Line-in | High Level Input
Input Connectors: 2 x RCA (Stereo) | 2 x Spring Loaded Terminal Blocks
Output Connectors: 2 x Spring Loaded Terminal Blocks
Cooling Type: Convection
Power Input: AC 115V/230V / 50Hz-60Hz (Auto Adjust)
Special Features: Invisible Down-Firing Speaker | Low-Pass Filter Frequency Adjustment
Construction: Non-Resonant MDF
IP Rating: Indoor Use
Dimensions (WxHxD): 300 x 394 x 328mm (11.8" x 15.5" x 12.9")
Net Weight: 9.5kg (21lb)
Shipping Weight: 12kg (26.5lb)

Product Type: Active Down-Firing Subwoofer
Frequency Response (-6dB): 32Hz - 200Hz
RMS Power: 100W
Program Power: 200W
Speaker Output: High Level Output (needs a pre-amplified signal input)
Subwoofer Driver: 10" Polypropylene Subwoofer
Audio Signal Inputs: Stereo Line-in | High Level Input
Input Connectors: 2 x RCA (Stereo) | 2 x Spring Loaded Terminal Blocks
Output Connectors: 2 x Spring Loaded Terminal Blocks
Cooling Type: Convection
Power Input: AC 115V/230V / 50Hz-60Hz (Auto Adjust)
Special Features: Invisible Speaker | Low-Pass Filter Frequency Adjustment
Construction: Non-Resonant MDF
IP Rating: Indoor Use
Dimensions (WxHxD): 300 x 394 x 328mm (11.8" x 15.5" x 12.9")
Net Weight: 9.5kg (21lb)
Shipping Weight: 12kg (26.5lb)