NEXT Audicom A504 DSP 4-kanaals amplifier met DSP
NAC-A504DSP
Product Type: Class D Amplifier with DSP
Frequency Response: 20Hz - 20kHz (+0 / -1dB)
Amplifier Technology: Class D
Number of Amplifier Channels: 4 Channels
Amplifier Power - Stereo 8Ω: 4 x 250W
Amplifier Power - Stereo 4Ω: 4 x 500W
Amplifier Power - Bridge 8Ω: 2 x 1000W
Amplifier Gain: 34dB±0.5dB
Speaker Output: 4Ω - 16Ω
Damping Factor: >180
THD+N: <0.15%
SNR (Signal to Noise Ratio): >95dB
Crosstalk: >50dB
Input Sensitivity: 0.9V - 1.1V (+0 / -1dBv)
Input Impedance: Balanced: 20kΩ | Unbalanced: 10kΩ
DSP Technology: 4 IN x 4 OUT - 32bit | 192kHz DSP
Latency: 0.66ms
DSP Adjustable Parameters: PEQ, HPF, LPF, HSF, LSF, Compressor, Gate, Level, Delay, Polarity, Mute
Delay Adjustment: 62.4ms / 21.42m per Channel
Control Type: On the Amplifier Encoder and LCD | Via USB and Suplied Software "A504 DSP Controller"
Audio Signal Inputs: Analog Audio
Input Connectors: 4 x Neutrik XLR
Audio Signal Outputs: None
Output Connectors: None
Speakers Output Connectors: 4 x Neutrik NL4
Protections: Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar
Operating Temperature Range: 0ºC - 40ºC
Cooling Type: Speed Controlled Fan
Power Supply: Switching Mode Power Supply (SMPS)
Power Input: AC 110V - 120V | AC 220V - 240V 50Hz/60Hz ±10%
Mains Connector: Standard IEC socket
Power Consumption: 1100W
Fittings: 1U 19" Rack
Dimensions (WxHxD): 483 x 44 x 290mm (19 x 1.73 x 11.4 in)
Net Weight: 6kg (13.2lb)
Shipping Weight: 7.2kg (2.2 lb)
17 op voorraad
The A504DSP combines a lightweight, 4 x 500W (2 x 1000W) amplifier, with a powerful DSP engine that can be configured to suit a wide range of tasks, without the need for additional equipment, to drive a wide range of loudspeaker systems. The close integration of processing and amplification allows the DSP to monitor and better adapt to amplifier behavior, making dynamics processing far more accurate and effective than that typically achieved with separate components.
MAXIMUM FLEXIBILITY: The A504DSP flexibly distributes the total amplifier power in various combinations across four, three or two outputs to drive, for example: Four full-range loudspeakers or subwoofers, High-power subwoofer + two full-range loudspeakers, High-power subwoofer + bi-amplified speaker or High-power full-range loudspeaker + High-power subwoofer.
SOLID AS A ROCK: The A504DSP is a very reliable and strong DSP Amplifier specially designed for both touring and installation with a very simple use.
NEUTRIK CONNECTORS: Designed for professional applications, the XLR Chassis Connectors are produced by Neutrik.
ADVANCED DSP: Onboard, advanced DSP engine, controlled by built-in OLED screen with an encoder or by a PC, with Input/Output routing, High-Pass and Low-Pass filters, Parametric EQ Filters, Compressors/Limiters, noise gates and Alignment Delays.