Audiocom P6

Audiocom P6

2 x 850W Class AB Amplifier, 2U
Product Type: Class AB Professional Amplifier
Frequency Response: 15Hz - 25.000Hz (+0 / -1dB)
Amplifier Technology: Class AB
Amplifier Power - Stereo 8Ω: 2 x 400W
Amplifier Power - Stereo 4Ω: 2 x 625W
Amplifier Power - Stereo 2Ω: 2 x 850W
Amplifier Power - Bridge 8Ω: 1 x 1250W
Amplifier Power - Bridge 4Ω: 1 x 1700W
Damping Factor: >400:1
THD+N: <0.03%
IMD: <0.038%
SNR (Signal to Noise Ratio): >102dB
Slew Rate: 40V/uS
Input Sensitivity: Selectable (0.77V / 1.0V / 1.44V)
Input Impedance: 10kΩ balanced to ground
Input Connectors: Female XLR-3 and 6.35 TRS jack
Output Connectors: 4 pole SpeakON and binding posts
Protections: Full short circuit, open circuit, thermal, soft start, DC, Sub/Ultrasonic and RF
Cooling Type: Front to back via 2 variable speed fans
Power Input: 210V - 240V AC, 50Hz-60Hz
Dimensions (WxHxD): 483mm x 465mm x 88.8mm
Net Weight: 23.5kg
Shipping Weight: 25kg

Product Type: Class D Amplifier with BT
Frequency Response (-6dB): 20Hz - 20kHz
Amplifier Technology: Class D Amplifier
Amplifier Power: 2 x 160W@4Ω | 2 x 100W@8Ω
Speaker Output: 4Ω - 16Ω
THD+N: <0.1%
SNR (Signal to Noise Ratio):>90dB
Input Sensitivity:0.7Vrms
Wireless Connection System: BT v4.1 aptX
Wireless Range: >10m (32.8ft)
Audio Signal Inputs: BT | Audio Line-in
Input Connectors: 1 x Stereo RCA
Output Connectors: Gold Plated Binding Posts
Cooling Type: Convection
Power Input: Power Supply: AC 110V - 240V | DC 36V - 4.5A
Power Consumption: 160W
Construction: Aluminum
IP Rating: Indoor Use
Dimensions (WxHxD): 117 x 39 x 211mm (4.6" x 1.5" x 8.3")
Net Weight: 0.65kg (1.4lb)
Shipping Weight: 1.4kg (3.1lb)
- Power Input: Power Supply: AC 110V - 240V, DC 36V - 4.5A
- Power Consumption: 160W

2 x 1900W Class H Amplifier

Product Type: BT Class D Amplifier
Frequency Response (-6dB): 20Hz - 20kHz
Amplifier Technology: Class D Amplifier
Amplifier Power: 2 x 30W@8Ω
Speaker Output: 8Ω - 16Ω
THD+N: <0.1%
SNR (Signal to Noise Ratio): >82dB
Input Sensitivity: 0dBV (0.7V)
Wireless Connection System: BT v2.1 + EDR
Wireless Range: 10m (32.8ft)
Audio Signal Inputs: BT | Stereo Line-in
Input Connectors: 3.5mm Stereo Jack
Cooling Type: Convection
Power Input: AC 100V-240V / 50Hz-60Hz
Power Consumption: 0.24W - Idle
Construction: Aluminum
IP Rating: Indoor Use
Dimensions (WxHxD): 100 x 35 x 125mm (3.9" x 1.4" x 4.9")
Fixation: Screw Fixation to Wall / Ceiling
Net Weight: 330g (0.73lb)
Shipping Weight: 350g (0.77lb)

Product Type: Class D Amplifier with DSP
Frequency Response: 20Hz - 20kHz (+0 / -1dB)
Amplifier Technology: Class D
Number of Amplifier Channels: 4 Channels
Amplifier Power - Stereo 8Ω: 4 x 250W
Amplifier Power - Stereo 4Ω: 4 x 500W
Amplifier Power - Bridge 8Ω: 2 x 1000W
Amplifier Gain: 34dB±0.5dB
Speaker Output: 4Ω - 16Ω
Damping Factor: >180
THD+N: <0.15%
SNR (Signal to Noise Ratio): >95dB
Crosstalk: >50dB
Input Sensitivity: 0.9V - 1.1V (+0 / -1dBv)
Input Impedance: Balanced: 20kΩ | Unbalanced: 10kΩ
DSP Technology: 4 IN x 4 OUT - 32bit | 192kHz DSP
Latency: 0.66ms
DSP Adjustable Parameters: PEQ, HPF, LPF, HSF, LSF, Compressor, Gate, Level, Delay, Polarity, Mute
Delay Adjustment: 62.4ms / 21.42m per Channel
Control Type: On the Amplifier Encoder and LCD | Via USB and Suplied Software "A504 DSP Controller"
Audio Signal Inputs: Analog Audio
Input Connectors: 4 x Neutrik XLR
Audio Signal Outputs: None
Output Connectors: None
Speakers Output Connectors: 4 x Neutrik NL4
Protections: Full short circuit, open circuit, thermal, ultrasonic, and RF protection stable into reactive or mismatched loads, turn ON/OFF, muting, tried crowbar
Operating Temperature Range: 0ºC - 40ºC
Cooling Type: Speed Controlled Fan
Power Supply: Switching Mode Power Supply (SMPS)
Power Input: AC 110V - 120V | AC 220V - 240V 50Hz/60Hz ±10%
Mains Connector: Standard IEC socket
Power Consumption: 1100W
Fittings: 1U 19" Rack
Dimensions (WxHxD): 483 x 44 x 290mm (19 x 1.73 x 11.4 in)
Net Weight: 6kg (13.2lb)
Shipping Weight: 7.2kg (2.2 lb)

Product Type: Class D Amplifier with DSP
Frequency Response: 20Hz - 20kHz (+0 / -0.25dB)
Amplifier Technology: UMAC Class D - Full Bandwidth PWM Modulator With Ultra-Low Distortion
Number of Amplifier Channels: 4 Channels Low Impedance (LoZ) / 2 Channels High Impedance (HiZ)
Amplifier Power - Stereo 8Ω: 4 x 125W
Amplifier Power - Stereo 4Ω: 4 x 125W
Amplifier Power - 100V: 2 x 250W
Amplifier Power - 70V: 2 x 250W
Speaker Output: 4Ω - 16Ω | 70V | 100V
Zones Output: 4-Zones Output
THD+N: <0.05% (20Hz-20kHz, 8Ω load, 3dB below rated power)
SNR (Signal to Noise Ratio): >106dB (A-weighted, 20Hz-20kHz, 8Ω load)
Output Voltage: 70Vp / 140Vpp (unloaded) | Bridged 140Vp / 280 Vpp (unloaded)
DSP Technology: Ultimate DSP with WI-FI and Ethernet Connection
DSP Adjustable Parameters: Filters: PEQ, FIR, hi/lo-shelving, all-pass, band-pass, hi/lo-pass | Limiters: RMS Voltage, Peak Voltage | GPIO Functions | Routing
DSP Presets: Allows to Store and Load Individual Presets as well as Preset Libraries
Delay Adjustment: 100ms (34.3m) per Output
Control Type: Controlled Via Webpage - Compatible with Desktop, Tablet and Mobile Phone (Wireless or Cable 1 x RJ45)
Wireless Connection System: Works as a WI-FI Access Point (WAP) or WI-FI Client
Audio Signal Inputs: 4 x Analog Unbalanced Inputs | 4 x Analog Balanced Inputs | Stereo S/PDIF
Input Connectors: 4 x RCA | 2 x 6-Pole 3.5mm Phoenix Type | 1 x RCA | 8 x GPIO
Audio Signal Outputs: Stereo S/PDIF
Output Connectors: 1 x RCA | 8 x GPIO
Speakers Output Connectors: 2 x 4-Pole 5mm Phoenix Type
Protections: Short Circuit, DC, Undervoltage, Temperature and Overload Protection
Operating Temperature Range: 0ºC - 40ºC
Cooling Type: Speed Controlled Fan
Power Supply: UREC Universal Mains Switch Mode Power Supply (SMPS) with Power Factor Correction (PFC) and Standby Converter
Power Input: AC 100V - 240V 50Hz/60Hz
Mains Connector: Standard IEC socket
Power Consumption: 150W
Special Features: GPIO Functions: Standby, Mute, Volume Control, Trigger IN, Trigger OUT
Dimensions (WxHxD): 44 x 220 x 319mm (1.7 x 8.7 x 12.6 in)
Fixation: 1U 19" Rack Mount | Wall / Desktop Mount (Necessary Accessories Not Included)
Net Weight: 2.8kg (6.2 lbs)
Shipping Weight: 3.5kg (7.7 lbs)
Accessories: 19" Rack Mount Kit | Wall / Desktop Mount Kit (not included)

BAG FOR MV3

Product Type: 2-Way Premium Ceiling Speaker (8Ω/100V)
Frequency Response (-6dB): 70Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 40W (8Ω)
Program Power: 80W (8Ω)
Nominal Impedance: 8Ω (Transformer bypass)
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 109dB
Transformer Taps 100V: 2.5W | 5W | 10W
Transformer Taps 70V: 1.25W | 2.5W | 5W
Low Frequency Driver: 5.25" Reinforced Polymer Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Titanium Dome Tweeter
Input Connectors: Gold Plated Binding Posts (8Ω) / Quick Release Connector (100V)
Recommended Amplifier: A40 | A200 | MX120 | MX350
Special Features: Adjustable Environment Equalizer (±3dB)
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 204mm x 78mm (8" x 3.1")
Cutout Diameter: 179mm (7")
Mounting Depth: 78mm (3.1")
Wall / Ceiling Thickness: 3mm to 15mm (0.12" to 0.59")
Fixation: Plastic Clamps for Ceiling Fixation
Net Weight: 1.2kg (2.6lb)
Shipping Weight: 1.5kg (3.3lb)
Accessories: Black Frameless Magnetic Grille (not included)

Product Type: 2-Way BT Premium Ceiling Speakers
Frequency Response (-6dB): 62Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (C6B Pro Slave)
Amplifier Power: 30W + 30W (C6B PRO Slave Speaker Output)
DSP Presets: Classical | Vocal Enhance | Flat | Bass Enhance | Bass Cut | Treble Enhance | Treble Cut | Pop | Rock | Jazz
Wireless Connection System: BT v5.0 aptX LL
Wireless Range: >10m (32.8ft)
Maximum SPL (calculated): 107.8dB (2 Coupled Speakers)
Low Frequency Driver: 6.5" Polypropylene Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Silk Dome Tweeter
Audio Signal Inputs: Stereo BT | Audio Line-in
Input Connectors: 1 x Stereo RCA (Master Speaker) | Gold Plated Binding Posts (Slave Speaker)
Power Input: Power Supply: AC 100V - 240V | DC 24V- 2.5A Output
Power Consumption: 60W
Special Features: Tool Free Install | Remote Control | 50% Level Limiter | Mono-Stereo Switch
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 234mm x 105mm (9.21" x 4.1")
Cutout Diameter: 209mm (8.2")
Mounting Depth: 102mm (4")
Wall / Ceiling Thickness: 7mm to 20mm (0.28" to 0.79")
Fixation: Specially Designed Dog Legs Ceiling Fixation
Net Weight: Master - 1.5kg (3.3lb) | Slave - 1.5kg (3.3lb)
Shipping Weight: 4.5kg (9.9lb)
Accessories: Black Frameless Magnetic Grille (not included)

Low Frequency Driver: 6.5" Reinforced Polymer Cone Woofer
High Frequency Driver: 0.75" Pivoting (±10°) Titanium Dome Tweeter
Frequency Response (-6dB): 65Hz - 20kHz
Nominal Coverage (-6dB): 100° Conical
RMS Power: 60W
Program Power: 120W
Nominal Impedance: 8Ω (Transformer bypass)
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 110.8dB
Transformer Taps 100V: 7.5W | 15W | 30W
Transformer Taps 70V: 3.75W | 7.5W | 15W
Input Connectors: Gold Plated Binding Posts (8Ω) / Quick Release Connector (100V)
Special Features: Adjustable Environment Equalizer (±3dB)
Grille: White Frameless Magnetic Grille (Paintable) | Detachable Logo
IP Rating: Indoor Use
Dimensions (ØxD): 234mm x 87mm (9.21" x 3.43")
Cutout Diameter: 210mm (8.3")
Mounting Depth: 87mm (3.4")
Wall / Ceiling Thickness: 3mm to 15mm (0.12" to 0.59")
Fixation: Plastic Clamps for Ceiling Fixation
Net Weight: 1.79kg (3.94lb)

Full-Range Driver: 6.5" Dual Cone Woofer
Transformer Taps 100V: 1.5W | 3W | 6W
Transformer Taps 70V: 0.75W | 1.5W | 3W
Frequency Response (-10dB): 70Hz - 16kHz
Nominal Coverage (-6dB): 85º Conical
Sensitivity (1W, 1m): 90dB
Maximum SPL (calculated): 97.8dB
IP Rating: Indoor Use
Grille: White Aluminum Frameless Grille RAL9003 (Paintable) | Detachable Logo
Dimensions (ØxD): 190mm x 79mm (7.48" x 3.11")
Cutout Diameter: 170mm (6.7")
Mounting Depth: 80mm (3.15")
Wall / Ceiling Thickness: 5mm to 35mm (0.2" to 1.38")
Net Weight: 0.67kg (1.5lb)

Cover for MV6

Product Type: Flexible Active PA System - 1 x 15" + 2 x 8"
Frequency Response (-6dB): 40Hz - 19kHz
Nominal Coverage (-6dB): 50-100° H x 55º V (User Rotatable)
Amplifier Technology: Class D with DSP
Amplifier Power: RMS: 1000W | PGM: 2000W
DSP Technology: 24bit | 48kHz DSP
DSP Presets: Flat Indoor, Flat Outdoor, Music, DJ, Vocal
Control Type: Parameters Controlled on the Subwoofer Panel
FR Maximum SPL (calculated): 121dB
SW Maximum SPL (calculated): 127dB
Subwoofer Driver: 15" Woofer | 3" Voice Coil
Low Frequency Driver: 8" Woofer | 1.5" Voice Coil
High Frequency Driver: 1.4" Driver | 1.35" Voice Coil
Audio Signal Inputs: Mono / Stereo Analog Audio
Input Connectors: 2 x XLR / TRS Combo
Audio Signal Outputs: Mono / Stereo Analog Audio
Output Connectors: 2 x XLR
Speakers Output Connectors: 2 x NL4 (1+/1-)
Protections: Overload and Overcurrent
Operating Temperature Range: 0ºC - 45ºC (32ºF - 113ºF)
Cooling Type: Speed Controlled Fan
Power Supply: Switching Mode Power Supply (SMPS)
Power Input: AC 110V - 120V | AC 220V - 240V 50Hz/60Hz
Mains Connector: Standard IEC socket
Power Consumption: 280W (1/8 Max. Power)
Special Features: Subwoofer Phase (0º / 180º) | Input Type (Mono / Stereo) | Main Level Adjust. | Subwoofer Level Adjust.
Fittings: 35mm Pole Mount Socket
Handles: Subwoofer: One on Each Side | Satellite: One on Top
Grille: Powder Coated Steel Grille with Acoustical Foam
Construction: 12mm and 15mm Multi-Laminate Plywood
Finish: Poliurea Coating
Dimensions (WxHxD): Subwoofer: 440 x 655 x 583mm (17.3 x 25.8 x 23 in) | Satellite: 250 x 440 x 238mm (9.8 x 17.3 x 9.4 in)
Accessories: Speaker Cables and Subwoofer Wheels are included

Garden Accessory for P4
Fixation: Buried in the Ground / Screwed to a rigid surface
Speciual Features: Totally adjustable angle

Product Type: Garden Accessory for P6
Special Features: Adjustable Tilt Angle
Dimensions (WxHxD): 234 x 307 x 234mm (9.21" x 12" x 9.21")
Fixation: Buried in the Ground |Screwed to a Rigid Surface

Product Type: Digital Mixing Console (USB Audio Interface)
Mixer: 4 Channels (2 x Mono | 1 x Stereo)
DSP Technology: 24bit | 192kHz
Effects: Ambience, Bathroom, Room, Plate, Spring, Hall, Warehouse, Cathedral, Gated Reverb, Chorus, Chorus Reverb, Phaser, Phaser Reverb, Flanger, Flanger Reverb, Rotary, Delay
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Audio Signal Inputs: BT | Microphone (+48V) | Instrument (HI-Z) | USB | AUX | CD Player | PC (2 Channels)
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x USB | 1 x Stereo RCA | 1 x USB 2.0
Audio Signal Outputs: Main Output | Headphones | PC (2 Channels)
Output Connectors: 2 x Balanced TRS | 1 x 3.5mm Stereo Jack | 1 x USB 2.0
Power Input: Power Supply: AC 100V - 240V 50Hz/60Hz | DC 5V - 2A
Power Consumption: 10W (2A)
Special Features: HI-Z, Low Cut, EQ (LOW, MID, HIGH), Phantom Power (+48V), Effects, USB Stick Recording, PC Recording
Construction: Reinforced Plastic
Dimensions (WxHxD): 153 x 64 x 175mm (6 x 2.5 x 6.9 in)
Net Weight: 0.6kg (1.3lb)
Shipping Weight: 0.9kg (2lb)

Product Type: Battery Powered Portable Speaker
Frequency Response (-6dB): 42Hz - 20kHz
Nominal Coverage (-6dB): 100º Conical
Program Power: 150W
Peak Power: 300W
Amplifier Technology: Class D Amplifier with DSP
Mixer: 3 Channels
Effects: Reverb
DSP Presets: Tone Optimizer for Microhpone/Guitar | Automatic EQ on Speaker Stand
Wireless Connection System: BT v5.0 with TWS (True Wireless Stereo)
Wireless Range: 10m (32.8ft)
Maximum SPL (calculated): 116dB / 119dB (Full-space)
Low Frequency Driver: 10" Woofer | 2.5" Voice Coil
High Frequency Driver: 1" High Frequency Driver
Audio Signal Inputs: BT | Microphone | Instrument | USB | AUX
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x USB
Audio Signal Outputs: Mixer Output
Output Connectors: 1 x TRS 6.35mm Jack
Cooling Type: Convection
Power Input: AC 100V - 240V 50Hz/60Hz
Power Consumption: 150W (0.6A)
Special Features: USB Charging Port: 5V /1A
Battery Type: Lithium-Ion Rechargeable Battery - 5000mAh
Bat. Playback Time: Up to 8 Hours
Bat. Charging Time: 3 to 5 Hours
Fittings: 35mm Pole Mount Socket
Handles: One on Top
Construction: Light-Weight ABS Plastic
Dimensions (WxHxD): 344 x 473 x 363mm (13.5 x 18.6 x 14.3 in)
Net Weight: 11.6kg (25.6lb)
Shipping Weight: 13.7kg (30.2lb)
Accessories: MV10 Protective Cover (not included)

Product Type: Active Portable Speaker
Frequency Response (-6dB): 53Hz - 19.5kHz
Nominal Coverage (-6dB): 90º H x 60º V
Program Power: 550W
Peak Power: 1100W
Amplifier Technology: Class D Amplifier with DSP
Mixer: 2 Channels
DSP Presets: Flat | Music | External Subwoofer | Monitor | Voice
Wireless Connection System: BT v4.0
Wireless Range: 10m (32.8ft)
Maximum SPL (calculated): 124dB
Low Frequency Driver: 12" Woofer | 2" Voice Coil
High Frequency Driver: 1" Titanium Driver | 1.75" Voice Coil
Audio Signal Inputs: BT | Microphone | Instrument | CD Player | AUX
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x Stereo RCA
Audio Signal Outputs: Mixer Output
Output Connectors: 1 x XLR
Cooling Type: Convection
Power Input: AC 100V - 240V 50Hz/60Hz
Power Consumption: 550W (2.3A)
Fittings: 2 x 35mm Pole Mount Sockets (Straight + 8º Tilted)
Handles: Two on Back
Construction: Strengthen PP Plastic
Dimensions (WxHxD): 368 x 513 x 343mm (14.5" x 20.2" x 13.5")
Net Weight: 15.7kg (34.6lb)
Shipping Weight: 17.2kg (37.9lb)
Accessories: MV12 Protective Cover (not included)

Product Type: High Power Portable Speaker
Frequency Response (-6dB): 60Hz - 20kHz
RMS Power: 65W
Program Power: 130W
Wireless Connection System: BT v4.2 + EDR + BLE
Wireless Range: 10m (32.8ft)
Subwoofer Driver: 1 x 6" Subwoofer
Low Frequency Driver: 2 x 3" Woofer
High Frequency Driver: 2 x 1" Tweeter
Audio Signal Inputs: Stereo BT | AUX
Input Connectors: 1 x 3.5mm Stereo Jack
Audio Signal Outputs: Stereo BT Transmission to another MV3 (TWS)
Output Connectors: 1 x USB A Type Port
Power Input: Power Supply: AC 100V - 240V 50Hz/60Hz | DC 12V - 3A
Special Features: NFC Pairing | TWS | USB Charger 5V - 2A
Battery Type: Rechargeable - 7.4V / 6600mAh (Lithium-ion)
Bat. Playback Time: Up to 20 Hours
Bat. Charging Time: 4 Hours
Dimensions (WxHxD): 178 x 425 x 178mm (7" x 16.7" x 7")
Net Weight: 4.2kg (9.3lb)
Shipping Weight: 4.6kg (10.1lb)
Accessories: Transportation Bag for MV3 (not Included)

Product Type: Battery Powered Portable Speaker
Frequency Response (-6dB): 70Hz - 20kHz
Nominal Coverage (-6dB): 100º H x 80º V
Program Power: 100W
Peak Power: 200W
Amplifier Technology: Class D Amplifier with DSP
Mixer: 3 Channels
DSP Presets: Tone Optimizer for Microhpone/Guitar | Automatic EQ on Speaker Stand
Wireless Connection System: BT v5.0 with TWS (True Wireless Stereo)
Wireless Range: 10m (32.8ft)
Maximum SPL (calculated): 116dB
Low Frequency Driver: 6.5" Woofer | 2" Voice Coil
High Frequency Driver: 1" High Frequency Driver
Audio Signal Inputs: BT | Microphone | Instrument | USB | AUX
Input Connectors: 2 x XLR / TRS combo | 1 x 3.5mm Stereo Jack | 1 x USB
Audio Signal Outputs: Mixer Output
Output Connectors: 1 x TRS 6.35mm Jack
Cooling Type: Convection
Power Input: AC 100V - 240V 50Hz/60Hz
Power Consumption: 100W (0.4A)
Special Features: USB Charging Port: 5V /1A
Battery Type: Lithium-Ion Rechargeable Battery - 5000mAh
Bat. Playback Time: Up to 12 Hours
Bat. Charging Time: 5 Hours
Fittings: 35mm Pole Mount Socket
Handles: One on Top
Construction: Light-Weight ABS Plastic
Dimensions (WxHxD): 258 x 342 x 283mm (10.2 x 13.5 x 11.1 in)
Net Weight: 7.2kg (15.9lb)
Shipping Weight: 7.9kg (17.4lb)
Accessories: MV6 Protective Cover (not included)

2x M8: Passive column array
2x HFA115S: 2-channel active reflex subwoofer
2x Matrix SPB: speaker pol bracket for matrix
2x ADT 82140: adjustable distance tube (0.82-1.4m)
2x SC225 2.2: Speaker cable 2 x 2.5mm² NL4 2.2m

Product Type: Portable Soundbar
Frequency Response (-6dB): 100Hz - 20kHz
RMS Power: 20W (2x10W)
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Full-Range Driver: 2 x 2" Full-Range Loudspeakers
Subwoofer Driver: 2 x Passive Radiators
Audio Signal Inputs: BT | AUX | Micro SD | USB | FM Radio
Input Connectors: 3.5mm Stereo Jack | USB A Type | Micro SD Slot
Power Input: DC 5V - 1A
Special Features: Remote Control | Hands-Free Calls
Battery Type: Rechargeable - 4000mAh (Lithium-ion)
Bat. Playback Time: 6 Hours
Bat. Charging Time: 3 to 4 Hours
Construction: High Grade Polished Polymer
Dimensions (WxHxD): 420 x 73 x 65mm (16.5" x 2.8" x 2.5")
Net Weight: 900g (1.9lb)
Shipping Weight: 1.2kg (2.6lb)

Product Type: Portable Soundbar
Frequency Response (-6dB): 100Hz - 20kHz
RMS Power: 20W (2x10W)
Wireless Connection System: BT v5.0
Wireless Range: 10m (32.8ft)
Full-Range Driver: 2 x 2" Full-Range Loudspeakers
Subwoofer Driver: 2 x Passive Radiators
Audio Signal Inputs: BT | AUX | Micro SD | USB | FM Radio
Input Connectors: 3.5mm Stereo Jack | USB A Type | Micro SD Slot
Power Input: DC 5V - 1A
Special Features: Remote Control | Hands-Free Calls
Battery Type: Rechargeable - 4000mAh (Lithium-ion)
Bat. Playback Time: 6 Hours
Bat. Charging Time: 3 to 4 Hours
Construction: High Grade Polished Polymer
Dimensions (WxHxD): 420 x 73 x 65mm (16.5" x 2.8" x 2.5")
Net Weight: 900g (1.9lb)
Shipping Weight: 1.2kg (2.6lb)

Dolly for up 2 Moka Sub

Flight-Case for 4 Moka Array + Cables

8 Moka Array, 2 Moka Sub, 2 Moka Sub A, 2 Mini Bumper, Cable Kit

Sub15a+sub15p: 1400w PGM, 2800w Peak
Top: 540w PGM, 1000W Peak
Each set of 2 subs + 4 tops, amplifier power 4*2300w