DAP NRG-12A Active 12” full-range speaker

DAP-D3655

180 W RMS, max SPL of 117 dB at 1 m
60 - 20,000 Hz frequency range
Dedicated mic and line inputs
Bluetooth 5.0 with True Wireless Stereo (TWS)
Internal DSP with 4 modes


€ 737,76
€ 545,00
prices incl. taxes and VAT

4 in stock

The DAP NRG-12A is an active full-range loudspeaker with a peak power of 360 watts (180 watts continuous RMS). It uses a 12” woofer and a 1” compression driver, and has an internal DSP with 4 useful modes: Contour, Flat, Speech and +Sub, which apply a loudness curve, a flat curve, a high-pass curve or a high-pass with optimised frequency and phase curve specifically for the NRG subwoofer range respectively. The compression driver is coupled to a rotatable horn with a directivity of 90°x 60°. The internal class D amplifier has a switched-mode power supply to keep the weight down and efficiency level up. The internal DSP includes a crossover for the woofer and compression driver, a 2-band limiter, a short circuit protection and thermal protection.

As well as dedicated XLR combo jacks for microphone and line-level signals, the NRG-12A has an integrated Bluetooth 5.0 receiver for playing music from your mobile phone, laptop, or other Bluetooth media player. The Bluetooth receiver features True Wireless Stereo (TWS) and can be configured to enjoy stereo sound when using a pair of NRG full-range speakers. The line output is looped through and there is an additional ‘Mix out’ output with all signals available for driving a second unit or a subwoofer, preferably from the NRG range. Separate gain controls make it easy to adjust the level of the different input signals and a master control sets the overall volume.

The sturdy, lightweight plywood cabinet has a double-angled top hat (0° and 5°), allowing you to point the cabinet downwards when mounting it on a pole. To get the most out of the NRG-12A, we recommend adding an NRG series subwoofer.

Outputs

Power Amplifier RMS Output

180 W

Power Amplifier Peak Output

360 W

Main Outputs

1

Main Output Connector

3-pin XLR

Inputs

Mono Inputs

2

Mono Input Connector

3-pin XLR

Audio Specifications

THD Level

< 0.3 %

Signal-to-noise Ratio

> 95 dB

AD/DA Convertor Sample Rate

48 kHz

Audio Latency

1.2 ms

Amp Technology

Class D

Speaker System

2-way

Speaker Sensitivity (1 W/1 m)

96 dB

Maximum SPL at 1 m

117 dB

Frequency Response (-6 dB) Minimum

60 Hz

Frequency Response (-6 dB) Maximum

20000 Hz

Woofer Diameter

12 "

Woofer Voice Coil Diameter

2 "

Woofer Magnet Type

Ferrite

Compression Driver Diameter

1 "

Compression Driver Voice Coil

1.4 "

Compression Driver Magnet Type

Ferrite

Dispersion Angle (Horizontal)

90 °

Dispersion Angle (Vertical)

60 °

Internal Storage

User Presets

Yes

User Presets Capacity

4

Electrical Specifications and Connections

Power Supply

100-240 V AC 50-60 Hz

SMPS

Yes

Power Consumption

180 W

Power Connector In

Power Pro Blue

Mechanical Specifications

Height (mm)

575 mm

Width (mm)

345 mm

Depth (mm)

360 mm

Material

Plywood

Colour

Black

Weight

15.5 kg

IP Rating

IP20 (indoor use only)

Product Properties

LED Indicators

BT Pairing, DSP Mode, Limit, Power, Protect, Signal

Speaker Handle Positions

Left side, Right side

Rigging

Rigging Eye Thread

M10

Thermal Specifications

Maximum Ambient Temperature

40 °C

Maximum Surface Temperature

50 °C

Included Items

Included Cables

Power Pro Cable