NEXO EPS10 Installation Cabinet

EPS10

Measuring 531mm high x 316mm wide x 285mm deep and weighing 14.8Kg, the ePS10 combines a high excursion 10-inch LF driver with a 1.4- inch voice coil HF driver in a trapezoidal cabinet constructed in a bass-reflex design from 15mm baltic birch plywood. Achieving a peak SPL of 130dB with a frequency range of 70Hz to 20kHz, the ePS10 features a rotatable asymmetric horn, convenient rigging points on the cabinet top, bottom and back, and two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover.

KEY FEATURES

High power (130 dB peak) point source loudspeaker for fixed installation

Lightweight (14.8.kg / 32.6lbs) design

Robust 15 mm Birch plywood enclosure

NEXO’s Asymmetrical Dispersion Constant Directivity horn design (”PS” Horn), rotatable

IP55 protection level

Comprehensive range of accessories for deploying in a wide variety of fixed installation applications

Black finish with custom RAL colours available

SPECIFICATIONS

Frequency Response @-6 dB 70 Hz to 20 kHz

Sensitivity 1W@1m 101 dB SPL Nominal

Peak SPL@1m 130 dB

Vertical Dispersion +25°/-30°

Horizontal Dispersion 50° to 100° Asymmetrical

Crossover Frequency 70 Hz, 120 Hz

Nominal Impedance 8 Ω

Recommended Power 500 to 800 Watts / 8 Ohms

FEATURES

Number of ways 2 ways passive

LF Component 10" 8 Ohms long excursion neodymium driver

HF Component 1.4" diaphragm 8 Ohms HF driver on an Asymmetrical Dispersion (“PS”) horn

Connectors 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/- poles)

Compatible cables section Cables from 0.75 mm² to 3.3 mm² (AWG 18 to 12) copper section

Compatible cables outside diameter Cable with maximum outside diameter of 9 mm

Rigging points 3x M6 - 70 mm pitch rigging points (back) + 2x extra M6 and 1x M10 (top/bot)

Material 15 mm thick birch plywood body and galvanized grille

Finish Black structural paint (RAL9005 or Custom RAL upon request)

Front Finish UV & Fire resistant acoustic fabric

Height x Width x Depth 531mm x 316mm x 285mm (20.9" x 12.4" x 11.2")

Weight: Net 14.8 kg (32.6 lbs)

Operating temperature range 0°C - 40 °C (32° F - 104° F)

Storage temperature range -20 °C - 60 °C (-4 ° F - 140° F)

IP Rating IP54

System Operation

Recommended powering solution NXAMP4x1mk2 Powered TDcontroller: 1 x ePS10 per channel

Optional powering solution DTDcontroller + DTDAMP4x1.3 : Up to 2 x ePS10 per channel

NXAMP4x2mk2 Powered TDcontroller: Up to 4 x ePS10 per channel

NXAMP4x4mk2 Powered TDcontroller: Up to 4 x ePS10 per channel