This is made for the mobile DJ and has both Speakon NL4 and Blue & Grey Powercon

Nearly Identical to the AudioJoG Rack 8 but battery powered and hand held
-  3, 4 & 5 Pole XLR Male & Female
-  6.35mm Jack, stereo or mono
-  3.5mm Jack, stereo or mono
-  2.5mm Jack, stereo or mono
-  Powercon IN & OUT 
-  8 Pole Speakon
-  MINI DIN 4 Pole
-  DIN 3 & 5 (180°) & 8 Pole 
-  RCA Phono
-  BNC
-  RJ45, Ethercon
-  USB A & B
-  4mm Red & Black

Speakon NL4 connector is replaced by the Blue & Grey Powercon connectors
-  3, 4 & 5 Pole XLR Male & Female
-  6.35mm Jack, stereo or mono
-  3.5mm Jack, stereo or mono
-  2.5mm Jack, stereo or mono
-  Powercon IN & OUT 
-  8 Pole Speakon
-  MINI DIN 4 Pole
-  DIN 3 & 5 (180°) & 8 Pole 
-  RCA Phono
-  BNC
-  RJ45, Ethercon
-  USB A & B
-  4mm Red & Black

- Neutrik 3, 4 & 5 polige XLR (male & female);
- Neutrik 2, 4 & 8 polige Speakon;
- 6.35mm jack, (stereo & mono);
- 3.5mm jack (stereo & mono);
- 4.4 mm bantam enkel of dubbel (stereo & mono);
- RCA(tulp);
- BNC;
- DIN 180gr. 3, 5 & 8 polig;
- MINI DIN 4 polig, S-video;
- 4mm banaan 2x;
- RJ45 netwerk/ethercon;
- USB A & B.

Specifications

General specification:
• Test function for:
Speakerplug 4 pole
Speakerplug 8 pole
RJ-45
3,5 Mini-Jack
6,3 Jack
XLR 5 pole
XLR 3 pole
RCA
5 pole Din
• Battery operated
Dimensions: 187 x 37 x 90mm

he AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are functioning or not, both visibly via LEDs and audibly via a buzzer. This makes it the perfect tool for engineers both in the workshop and on stage.

The Pro AHMCT is operated simply, intuitively and safely via a single rotary switch on the device. The sturdy metal housing withstands even tough on-stage

This cable tester checks 3-pin and 5-pin DMX cables for continuity in fully automatic or manual pin selection modes. Pin connection status of the male and female cable ends is indicated by two rows of bright LEDs. In addition, the unit’s 3-pin connectors can also be used to test XLR microphone cables. The DMX Cable Tester comes with two L-brackets for variable mounting options.

This cable tester comes with all audio and electronics industry standard inputs, such as XLR (3-pin/5-pin), 3.5mm jack, 6.3mm jack, DIN (3-pin/5-pin), RCA, Speaker (4-pin), RJ45, RJ11, BNC.
The unit has separate units, which can be locked together or split apart for testing cables at either end of a signal chain.
Test tone generator
Three test speeds
Works on 2x 9V batteries (included)